Optimization procedure and fabrication of highly efficient and thermally stable solar coating for receiver operating at high temperature
| Autor: | Salvatore Esposito, Manuela Ferrara, Alessandro Antonaia, Antonio D’Angelo, Antonio Guglielmo, Anna Castaldo, M.L. Addonizio |
|---|---|
| Přispěvatelé: | Guglielmo, A., Addonizio, M. L., Ferrara, M., Castaldo, A., Antonaia, A., Esposito, S. |
| Rok vydání: | 2016 |
| Předmět: |
Materials science
Spectral selectivity 020209 energy Cermet 02 engineering and technology engineering.material Solar absorber Thermal emittance Photo-thermal conversion efficiency Solar mirror Optics Coating 0202 electrical engineering electronic engineering information engineering Parabolic trough Emissivity Thin film Renewable Energy Sustainability and the Environment business.industry Energy conversion efficiency Surfaces Coatings and Films Electronic Optical and Magnetic Materials Solar cell efficiency engineering Optoelectronics business |
| Popis: | In “parabolic trough” technology for concentrating solar plants, optimization and fabrication of effective and thermally stable solar coatings represent the most challenging technological goal in order to maximize the photo-thermal conversion efficiency of a solar field operating at high temperature. Starting from the typical cermet-based thin film stratification constituting high-performance solar coating, the optical properties of the metallic layer deposited as “back reflector” strongly determines the thermal loss amount, where solar coating emissivity should have to be as low as possible. Thanks to its very high reflectance in the infrared region, silver is more promising respect to transition metals such as molybdenum and tungsten. An adaptive tungsten layer deposited on stainless steel substrate has been employed with the aim of promoting improvements both on adhesion and on thermal stability of the Ag infrared reflector. Optimization procedure has been in detail described to design and to realize effective cermet-based solar coatings. Six different solar coatings with Ag as back reflector have been optically designed by means of a semi-empirical procedure where a layer-on-layer ellipsometric characterization was utilized. These optimized coatings were fabricated at increasing solar absorptance values coupled with emissivity values, evaluated at 580 °C, lower than 14%. Improved performances have been obtained respect to similar optimized solar coatings with W as back reflector and the highest photo-thermal conversion efficiency has been reached (>92% at 400 °C and >85% at 550 °C) among the solar coatings at the present state of the art. Excellent thermal and optical stability has been proved by means of annealing cycles at 580 °C under vacuum for a total duration of 85 days. © 2016 Elsevier B.V. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|