Magnetically geared conveyor drive unit - An updated version
| Autor: | Simon Staal Nielsen, Peter Omand Rasmussen, Rasmus Koldborg Holm, Nick Ilsoe Berg |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2020 |
| Předmět: |
business.product_category
Magnetic gear (MG) Continuous operation Computer science Rotor (electric) Magnetic gear Torque density Cogging torque conveyor integration torque density Automotive engineering industrial application Design for manufacturability law.invention drive unit law Chain conveyor business Sprocket |
| Zdroj: | Nielsen, S S, Koldborg Holm, R, Berg, N I & Omand Rasmussen, P 2020, Magnetically geared conveyor drive unit-An updated version . in ECCE 2020-IEEE Energy Conversion Congress and Exposition ., 9235375, IEEE, IEEE Energy Conversion Congress and Exposition, pp. 285-292, 12th Annual IEEE Energy Conversion Congress and Exposition, ECCE 2020, Virtual, Detroit, United States, 11/10/2020 . https://doi.org/10.1109/ECCE44975.2020.9235375 |
| Popis: | This paper presents an updated design of a magnetically geared drive unit for chain conveyor applications. The magnetic gear is placed partially inside the sprocket that drives the chain, and the permanent magnet synchronous machine driving the gear is placed axially next to the gear. The first version suffered from very large rotational losses leading to poor efficiency and thermal problems which limited the drive unit to a very low speed if continuous operation were to be sustained. Furthermore, due to a bad pole configuration, large cogging torque was seen on the HS rotor. This paper presents an updated version where the primary focus is to show, that both cogging torque and rotational losses can be reduced to an acceptable level. With a reduction of the rotational losses by a factor of 4.6 and a peak-to-peak cogging torque which has been reduced substantially, the main goals have been achieved. The mechanical integration is also simplified and manufacturability is improved. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|