| Popis: |
Numerous studies have focused on the mechanical properties of shale specimens to support hydraulic fracturing in shale gas engineering. However, the failure modes of shale specimens containing a pre-existing flaw are still not clear. A series of uniaxial compression tests were conducted on shale specimens containing a pre-existing flaw coupled with acoustic emission (AE) technology and a high-speed camera. A slow enough and variable loading speed scheme (0–50 kN: 0.1 kN/s, 50–100 kN: 0.05 kN/s; 100-failure: 0.02 kN/s) is adopted to allow microcracks to fully develop. The damage mechanism in the mesoscale from moment tensor inversion of the AE signals and the cracking behaviors on the macroscale were associated. Both the pre-existing flaw and the bedding layers had significant influences on the mechanical characteristics, progressive cracking, and failure modes of the shale specimens. The peak stress increases fluctuated as the bedding layer angle α increases, and the maximum and minimum values take place at α=90° and α=0°, respectively. In addition, the pre-existing flaw, the bedding layers, and the compression stress field jointly control the failure modes of the shale specimens. It was found that the α=0° specimen failed due to tension splitting, the α=30° specimen failed due to tension splitting and shear across the matrix, the α=60 specimen failed due to shear across the shale matrix and shear along the bedding layers, and the α=90° specimen failed due to tension along the bedding layers and shear across the shale matrix. The study can provide some references to the construction of complex crack networks in shale gas engineering. |
