Visco-elastohydrodynamic (VEHD) lubrication in radial lip seals : part 1: Steady-state dynamic viscoelastic seal behavior
| Autor: | Mjl Stakenborg, van Hj Harry Leeuwen, ten Eam Hagen |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 1990 |
| Předmět: |
Steady state
Materials science Deformation (mechanics) Mechanical Engineering media_common.quotation_subject Stiffness Surfaces and Interfaces Mechanics Inertia Seal (mechanical) Viscoelasticity Surfaces Coatings and Films Stress (mechanics) Mechanics of Materials medicine Lubrication Forensic engineering medicine.symptom media_common |
| Zdroj: | Journal of Tribology, 112(4), 578-583. American Society of Mechanical Engineers |
| ISSN: | 0742-4787 |
| Popis: | In general, most analyses of radial lip seal behavior assume a static deformation state in the seal lip. Nevertheless, a dynamic excitation of the seal lip always occurs in practice, due to unroundness of the shaft or motions of the shaft center. In this first part of a two part paper the influence of dynamic excitation on the occurrence of clearances in a dry seal-shaft contact is studied, taking into account viscoelasticity and inertia of the seal material. The ultimate goal is to determine whether viscoelastic seal behavior can result in a continuous fluid film or not. First, attention is paid to the mechanical behavior of synthetic rubber under an oscillating load. The seal elastomer shows a glass transition, resulting in a strong increase in stiffness with frequency. Next, a FEM analysis of the seal-shaft contact under dynamic conditions is presented. The steady-state response of the seal is represented by a transfer function approach. It is shown that clearances develop due to viscous and inertial seal material behavior. In practice, these clearances are filled with fluid. Due to entrainment and squeeze effects a fluid film is generated. This phenomenon is designated visco-elastohydrodynamic (VEHD) lubrication, and is subject of Part 2. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|