Motor performance improvement via ArcelorMittal’s iCARe® electrical steel range for automotive applications
| Autor: | Sigrid Jacobs, Lode Vandenbossche, Emmanuel Attrazic |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2015 |
| Předmět: |
efficiency
torque Computer science Powertrain Torque density engineering.material Wound rotor motor Automotive engineering Power (physics) law.invention law Electromagnetic coil Automotive Engineering engineering electric motors & Torque magnetic material propulsion systems and subsystems Performance improvement generators Electrical steel |
| Zdroj: | World Electric Vehicle Journal Volume 7 Issue 2 Pages 173-178 |
| ISSN: | 2032-6653 |
| DOI: | 10.3390/wevj7020173 |
| Popis: | As previously reported [1-3], ArcelorMittal has a specific electrical steel product line for core laminations, which optimises the performance for automotive traction electrical machines. This iCARe® product family consists of Save grades allowing for higher efficiency, Torque grades allowing for higher torque density and Speed grades for high speed rotors. The iCARe® electrical steels now have been developed towards further loss reduction and polarisation increase. This paper shows the improved machine performance achievable by using these new iCARe® grades. Automotive traction machines require high power density, high efficiency and high torque, to maximise the powertrain’s performance and minimise the use of battery power. Permanent magnet synchronous machines (PMSM) are the preferred choice for electric and hybrid vehicles. When searching for cost reduction via eliminating the need for permanent magnets, wound rotor synchronous machines (WRSM) are an alternative. In this paper, a material comparison study is presented for both a PMSM and a WRSM having the same nominal speed and rated mechanical power. The reference case uses M330-35A electrical steel. The impact of switching to either Save or Torque grades of the latest generation is compared numerically: to determine the efficiency of each combination of machine topology and lamination type, the ArcelorMittal loss model is used [4], an extension of Bertotti’s loss model [5]. The impact of each grade is checked by varying the stack height whilst keeping the output power level constant. Hence the bill of materials is affected, reflecting the amount of active materials (laminations, magnets, windings) needed within each machine type, depending on the chosen electrical steel grade. The results show the efficiency benefits when using low loss Save grades and the torque density benefits when using Torque grades. Moreover, the new Torque grades with lower losses present a new potential for further machine performance enhancement: for instance the Torque 27 grade combines outstanding increase of torque density with high efficiency. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|