| Popis: |
The pavement quality indicator (PQI) is a non-destructive piece of equipment for detecting the compaction degree of asphalt pavement, which can avoid primary damage to the pavement compared with the traditional core-drilling method. In this paper, the PQI method was applied to evaluate the compaction quality of asphalt pavement through data collection, calibration and statistical analysis, and the probability-distribution characteristics of compaction degree were also explored, by fitting the data with probability-distribution models. Furthermore, the optimal detection-spacing was determined by comparing the statistical results of compaction degree measured at different detection-spacings. Test results showed that the calibrated PQI data was close to the actual data of the core sample, and their error rate was within 1%. The compaction degree of the test road was mostly located between 92% and 99%, and the variable coefficient was entirely below 2%, demonstrating that the pavement-compaction quality was satisfactory and uniform. The normal distribution model, lognormal distribution model and extreme-value distribution model had relatively high accuracy in fitting the compaction-degree frequency data, while the sine-wave distribution model was low in fitting accuracy. By comparing the predicted value with the actual value of compaction degree, the normal distribution model was determined as the most appropriate model for describing the frequency distribution of compaction degree. In addition, the detection spacing was selected as 50 m, considering the reliability, accuracy and efficiency. The research results provide technical support for the compaction quality-control of asphalt pavement in a non-destructive, timely, accurate and multi-point manner, ultimately contributing to the excellent service performance and service life of asphalt pavement. |
