Fracture toughness analysis of HCCD specimens of Longmaxi shale subjected to mixed mode I-II loading
| Autor: | Hui Wang, Nicholas Fantuzzi, Shugang Cao, Yong Li, Ruikai Pan, Hongyun Yang, Mengyun Tian, Liu Yanbao |
|---|---|
| Přispěvatelé: | Wang H., Li Y., Cao S., Fantuzzi N., Pan R., Tian M., Liu Y., Yang H. |
| Jazyk: | angličtina |
| Rok vydání: | 2020 |
| Předmět: |
Toughness
Materials science Fracture toughne HCCD specimen Mechanical Engineering Fracture criterion 0211 other engineering and technologies 02 engineering and technology Mixed mode I-II Longmaxi shale 020303 mechanical engineering & transports Fracture toughness 0203 mechanical engineering Mechanics of Materials Bed Transverse isotropy Fracture (geology) General Materials Science Composite material Anisotropy Oil shale Stress intensity factor 021101 geological & geomatics engineering |
| Popis: | Longmaxi shale exhibits strong anisotropy due to its bedding planes induced by diagenesis. The anisotropic properties of shale have a significant effect on the stability control of geotechnical engineering. To investigate the influence of anisotropy of shale on its mixed mode fracture toughness, we performed Brazilian disc splitting tests on hollow center cracked disc shale specimens with different bedding and crack inclination angles (α and β, respectively). In this study, the fracture toughness of Longmaxi shale was calculated by the finite element method combined with either the J-integral or crack tip-opening displacement method. The results show that the dimensionless stress intensity factors and β values for pure mode-I and mode-II fractures both show anisotropic behavior by varying α. For all combinations of mode-I and mode-II loading, the fracture toughness also exhibits anisotropy by varying α; the mode-I fracture toughness decreases with increasing α when β > 30°, and the anisotropy is negligible for β = 0°. The anisotropy for mode-II fracture toughness is weak when β is small or large, whereas the anisotropy is significant when β = 45° and 60°. The effect of α on mode-I fracture toughness is greater than that on mode-II fracture toughness when β is small or large. Further, a comparison of four mixed-mode fracture criteria with the experimental results shows that the maximum tangential stress criterion for a transversely isotropic body can predict the mixed-mode fracture behavior of Longmaxi shale well. At the same time, it is suggested that the role of the T-stress should be considered to obtain more accurate prediction results. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|