Corrosion Protection of AISI 1010 Using Doped MoS2 Conductive Polymers

Autor: Gülden ASAN, Abdurrahman ASAN
Přispěvatelé: [Belirlenecek], Asan, Gülden, Asan, Abdurrahman
Jazyk: angličtina
Rok vydání: 2018
Předmět:
Zdroj: Volume: 7, Issue: 1 151-154
Journal of the Turkish Chemical Society Section A: Chemistry
Journal of the Turkish Chemical Society, Section A: Chemistry, Vol 7, Iss 1, Pp 151-154 (2020)
ISSN: 2149-0120
Popis: In this study, corrosion resistance of the coatings obtained by electrochemical oxidation of pyrrole and aniline on mild steel has been investigated in 0.1 M hydrochloric acid medium. It was aimed to increase the resistance of the coatings to corrosion by adding MoS2 to the coating solutions while covering the polypyrrole (PPy) and polyaniline (PANI). PPy, PANI, MoS2 doped PPy and MoS2 doped PANI coatings on the electrodes produced from mild steel were obtained by cyclic voltammetry in 0.1 M H2C2O4 environment. The voltammogram were carried out at a scan rate 100 mV/s from 0.0 V to 1.0 V with 10 scans. The corrosion resistance of the coatings in 0.1 M HCl medium was determined by Tafel polarization method. Best results were determined in MoS2 doped PPy coatings. Later, PPy coatings, MoS2 added PAN coatings and PANI coatings were determined respectively. The addition of MoS2 to the coating solution increased the corrosion resistance in both coatings. Similar results were obtained in different media in our previous studies. It is understood that MoS2 additive makes the coating surface impermeable and prevents deformation in the coating. © 2020, Turkish Chemical Society. All rights reserved. 2-s2.0-85079619689
Databáze: OpenAIRE