In-depth structural characterization of the lignin fraction of a pine-derived pyrolysis oil
| Autor: | Monique Bernardes Figueiredo, Robertus Hendrikus Venderbosch, Hero J. Heeres, Peter J. Deuss |
|---|---|
| Přispěvatelé: | Chemical Technology |
| Jazyk: | angličtina |
| Rok vydání: | 2020 |
| Předmět: |
chemistry.chemical_classification
020209 energy Lignocellulosic biomass 02 engineering and technology Fluorine-19 NMR Carbon-13 NMR Analytical Chemistry chemistry.chemical_compound Fuel Technology 020401 chemical engineering chemistry Comprehensive two-dimensional gas chromatography Pyrolysis oil 0202 electrical engineering electronic engineering information engineering Lignin Organic chemistry 0204 chemical engineering Pyrolysis Alkyl |
| Zdroj: | Journal of Analytical and Applied Pyrolysis, 149:104837. ELSEVIER SCIENCE BV |
| ISSN: | 0165-2370 |
| Popis: | Pyrolytic lignin (PL) is the collective name of the water-insoluble fraction of pyrolysis oils produced from the fast pyrolysis of lignocellulosic biomass. As the name suggests, PL is composed by fragments derived from lignin, which is the largest natural source of aromatic carbon. Its valorization is of major importance for the realization of economically competitive biorefineries. Nonetheless, the valorization of PL is hindered by its complex structure, which makes the development of tailored strategies for its deconstruction into valuable compounds challenging. In this work, we provide an in-depth analysis of the structural composition of PL obtained from a commercially available pine-derived pyrolysis oil obtained at 500 °C (Empyro B.V., the Netherlands). Molecular weight distribution and thermal stability were accessed by GPC and TGA, respectively, and the monomers present in the PL (≈ 15 wt%) were identified and quantified by chromatographic analyses (GCxGC–FID, GCxGC/TOF–MS, GC–MS and HPLC). Together with FTIR, Py-GC–MS, TAN, elemental analysis and various advanced NMR techniques (13C NMR, 31P NMR, 19F NMR, HSQC NMR, HMBC NMR), structural features of the PL oligomers were elucidated, revealing a guaiacyl backbone linked by alkyl, ether, ester and carbonyl groups, with none of the typical native lignin linkages (i.e. β–O–4, β–β, β–5) present. Furthermore, 72.3 % of the oxygen content in PL could be assigned to specific motifs by the quantitative analyses performed, and oligomeric models were proposed based on the obtained information. We expect that this characterization work can support future research on the development of valorization pathways for PL, allowing the feasible conversion of this promising feedstock into valuable biobased products with a wide range of possible applications, e.g. fuels, materials and specialty chemicals. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect