The effects of short pulse laser surface cleaning on porosity formation and reduction in laser welding of aluminium alloy for automotive component manufacture
| Autor: | A. Mistry, Ahmad W. Alshaer, Lin Li |
|---|---|
| Rok vydání: | 2014 |
| Předmět: |
Materials science
H710 chemistry.chemical_element Laser beam welding Welding Laser Atomic and Molecular Physics and Optics Electronic Optical and Magnetic Materials law.invention Corrosion chemistry law Aluminium visual_art Aluminium alloy visual_art.visual_art_medium Electrical and Electronic Engineering Composite material Porosity Dry lubricant |
| Zdroj: | Optics & Laser Technology. 64:162-171 |
| ISSN: | 0030-3992 |
| Popis: | Laser welding of aluminium alloys typically results in porosity in the fusion zones, leading to poor mechanical and corrosion performances. Mechanical and chemical cleaning of surfaces has been used previously to remove contaminants for weld joint preparations. However, these methods are slow, ineffective (e.g. due to hydrogen trapping) or lead to environmental hazards. This paper reports the effects of short pulsed laser surface cleaning on porosity formation and reduction in laser welding of AC-170PX (AA6014) aluminium sheets (coated with Ti/Zr and lubricated using a dry lubricant AlO70) with two types of joints: fillet edge and flange couch, using an AA4043 filler wire for automotive component assembly. The effect of laser cleaning on porosity reduction during laser welding using a filler wire has not been reported before. In this work, porosity and weld fusion zone geometry were examined prior to and after laser cleaning. The nanosecond pulsed Nd:YAG laser cleaning was found to reduce porosity significantly in the weld fusion zones. For the fillet edge welds, porosity was reduced to less than 0.5% compared with 10–80% without laser cleaning. For flange couch welds, porosity was reduced to 0.23–0.8% with laser cleaning from 0.7% to 4.3% without laser cleaning. This has been found to be due to the elimination of contaminations and oxide layers that contribute to the porosity formation. The laser cleaning is based on thermal ablation. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect