Autor: |
Badiâ Ait El Haj, Mohammed Alami, Aboubakr Bouayad |
Rok vydání: |
2015 |
Předmět: |
|
Zdroj: |
International Letters of Chemistry, Physics and Astronomy. 55:12-18 |
ISSN: |
2299-3843 |
Popis: |
In this study we used the cast TATUR samples that promotes the formation of an AlSi alloy porosity through a variable temperature gradient from top to bottom of the specimen. The die (permanent mold) was instrumented by thermocouples in order to follow the cooling of the specimen in several emplacements. Thermal analyses via cooling curves have been correlated to the microstructural data (SDAS measurement). Samples were cut from all castings and analyzed by optical microscopy in order to get the Secondary Dendrite Arm Spacing (SDAS) variation in function of cooling rates in the casting. The present work shows the effect of various pre-heating mould temperature and melt treatment on secondary dendrite arm spacing. |
Databáze: |
OpenAIRE |
Externí odkaz: |
|