Performance Analysis of Al2O3/Water Nanofluid with Cationic Chitosan Dispersant
| Autor: | L. Y. Jeng, Ching-Song Jwo, H. P. Cho, T. Y. Chen |
|---|---|
| Rok vydání: | 2013 |
| Předmět: |
Materials science
Article Subject General Engineering Cationic polymerization Nanoparticle Dispersant Chitosan chemistry.chemical_compound Thermal conductivity Nanofluid chemistry Chemical engineering lcsh:TA401-492 lcsh:Materials of engineering and construction. Mechanics of materials General Materials Science Suspension (vehicle) Dispersion (chemistry) |
| Zdroj: | Advances in Materials Science and Engineering, Vol 2013 (2013) |
| ISSN: | 1687-8442 1687-8434 |
| DOI: | 10.1155/2013/686409 |
| Popis: | This study aimed to investigate the effect of the cationic chitosan dispersant on the thermal conductivity, dispersion, and the suspension of 15 nm Al2O3/water nanofluid. The study employed two-step method to mix the Al2O3 powder, deionized water, and dispersant to conduct an experiment of the settling properties and thermal conductivity of nanofluid in a stable environment, analyzing the adhesion of nanofluid to copper pipe walls in practical operations. The results indicated that 1.0 wt.% Al2O3/water nanofluid with 0.05 wt.% cationic chitosan dispersant increased its thermal conductivity up to 4.1% and 12.6% compared with nanofluid with deionized water at the temperature of 15°C and 55°C. At the flow ratio of 2 L/min, the overall heat conductivity improved by 8.3% and 17.4%, respectively, under 60 W and 150 W heating power. The solution performed better in dispersion and suspension than that in the original sample with no cationic chitosan dispersant. The cationic chitosan dispersant, as a result, was proved to improve the dispersion and suspension of nanofluid. It also helped to reduce the frequency of nanoparticles sticking to the pipe wall, increasing the practicability of nanofluid. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|