Experimental analysis of the effects of wrinkles in the radius of curvature of L-shaped carbon-epoxy specimens on unfolding failure

Autor: Journoud, pierre, Bouvet, Christophe, Castanié, Bruno, Ratsifandrihana, Léon
Přispěvatelé: Centre National de la Recherche Scientifique - CNRS (FRANCE), Ecole nationale supérieure des Mines d'Albi-Carmaux - IMT Mines Albi (FRANCE), Institut National des Sciences Appliquées de Toulouse - INSA (FRANCE), Institut Supérieur de l'Aéronautique et de l'Espace - ISAE-SUPAERO (FRANCE), Université Toulouse III - Paul Sabatier - UT3 (FRANCE), Segula Technologies (FRANCE), Département de Mécanique des Structures et Matériaux - DMSM (Toulouse, France), Institut Clément Ader (ICA), Institut Supérieur de l'Aéronautique et de l'Espace (ISAE-SUPAERO)-Institut National des Sciences Appliquées - Toulouse (INSA Toulouse), Institut National des Sciences Appliquées (INSA)-Université de Toulouse (UT)-Institut National des Sciences Appliquées (INSA)-Université de Toulouse (UT)-Université Toulouse III - Paul Sabatier (UT3), Université de Toulouse (UT)-Centre National de la Recherche Scientifique (CNRS)-IMT École nationale supérieure des Mines d'Albi-Carmaux (IMT Mines Albi), Institut Mines-Télécom [Paris] (IMT)-Institut Mines-Télécom [Paris] (IMT), Segula Technologies [France]
Jazyk: angličtina
Rok vydání: 2022
Předmět:
Zdroj: Composites Part A: Applied Science and Manufacturing
Composites Part A: Applied Science and Manufacturing, 2022, 158, pp.106975. ⟨10.1016/j.compositesa.2022.106975⟩
ISSN: 1359-835X
Popis: International audience; An experimental study has been carried out to describe the evolution of the failure load relative to the maximum misalignment angle of curved carbon–epoxy laminates with out-of-plane wrinkle defects for a large range of misalignments. L-angle specimens with different levels of fibre wrinkling were manufactured and tested in four-point bending tests. Digital Image Correlation (DIC) and infrared thermography were used to monitor the tests. They allowed the stress concentrations induced by the wrinkles to be identified, together with their influences on the failure load of the sample. In most cases, increases in wrinkling levels led to decreases in failure loads.
Databáze: OpenAIRE
Externí odkaz: