A General Modeling Framework for Simulating Complex Recovery Processes in Fractured Reservoirs at Different Resolutions
| Autor: | Louis J. Durlofsky, Mohammad Karimi-Fard, Mun-Hong Hui, Bradley T. Mallison |
|---|---|
| Rok vydání: | 2018 |
| Předmět: |
Discretization
Petroleum engineering 0208 environmental biotechnology Energy Engineering and Power Technology Control engineering 02 engineering and technology 010502 geochemistry & geophysics Geotechnical Engineering and Engineering Geology 01 natural sciences 020801 environmental engineering 020401 chemical engineering 0204 chemical engineering Geology 0105 earth and related environmental sciences |
| Zdroj: | SPE Journal. 23:598-613 |
| ISSN: | 1930-0220 1086-055X |
| DOI: | 10.2118/182621-pa |
| Popis: | Summary A comprehensive methodology for gridding, discretizing, coarsening, and simulating discrete-fracture-matrix models of naturally fractured reservoirs is described and applied. The model representation considered here can be used to define the grid and transmissibilities, either at the original fine scale or at coarser scales, for any connectivity-list-based finite-volume flow simulator. For our fine-scale mesh, we use a polyhedral-gridding technique to construct a conforming matrix grid with adaptive refinement near fractures, which are represented as faces of grid cells. The algorithm uses a single input parameter to obtain a suitable compromise between fine-grid cell quality and the fidelity of the fracture representation. Discretization using a two-point flux approximation is accomplished with an existing procedure that treats fractures as lower-dimensional entities (i.e., resolution in the transverse direction is not required). The upscaling method is an aggregation-based technique in which coarse control volumes are aggregates of fine-scale cells, and coarse transmissibilities are computed with a general flow-based procedure. Numerical results are presented for waterflood, sour-gas injection, and gas-condensate primary production for fracture models with matrix and fracture heterogeneities. Coarse-model accuracy is shown to generally decrease with increasing levels of coarsening, as would be expected. We demonstrate, however, that with our methodology, two orders of magnitude of speedup can typically be achieved with models that introduce less than approximately 10% error (with error appropriately defined). This suggests that the overall framework may be very useful for the simulation of realistic discrete-fracture-matrix models. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|