Metal 3D printed D-Band waveguide to surface wave transition

Autor: Moataz M. Attallah, Stephen M. Hanham, Rafael Martinez, Suzanna Freer, Miguel Beruete, Miguel Navarro-Cia, Dayan Perez-Quintana
Přispěvatelé: Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa. ISC - Institute of Smart Cities, Universidad Pública de Navarra. Departamento de Ingeniería Eléctrica, Electrónica y de Comunicación, Nafarroako Unibertsitate Publikoa. Ingeniaritza Elektriko, Elektroniko eta Telekomunikazio Saila
Rok vydání: 2020
Předmět:
Zdroj: Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
instname
2020 45th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz)
Popis: The coupling efficiency between free space waves and surface waves is low, narrowband, or both. Highly efficient broadband (better than 20% fractional bandwidth) coupling from waveguide modes can be achieved through sophisticated transitions whose fabrication can be enabled through additive manufacturing (e.g. selective laser melting). Here, we present alternative metallic transitions designed to couple the fundamental mode of a D-band waveguide to the fundamental transversemagnetic surface mode supported by a periodic metal corrugated grating. Simulations of the coupling process and initial measurements have been undertaken. Work supported by EPSRC [Grant No. EP/S018395/1, Studentship No. 2137478], the Royal Society [Grant No. RSG/R1/180040], and the University of Birmingham [Birmingham Fellowship].
Databáze: OpenAIRE