Contribution of hybrid fibers on the improvement of sand concrete properties: Barley straws treated with hot water and steel fibers
Autor: | B. Belhadj, Michèle Queneudec, M. Bederina, M.S. Ammari, A. Ferhat |
---|---|
Přispěvatelé: | Laboratoire de l'intégration, du matériau au système (IMS), Université Sciences et Technologies - Bordeaux 1 (UB)-Institut Polytechnique de Bordeaux-Centre National de la Recherche Scientifique (CNRS), Université Amar Telidji - Laghouat, Eco-Procédés Optimisation et Aide à la Décision - UR UPJV 4669 (EPROAD), Université de Picardie Jules Verne (UPJV), Laboratoire Traitement du Signal et de l'Image (LTSI), Université de Rennes (UR)-Institut National de la Santé et de la Recherche Médicale (INSERM), Laboratoire des technologies innovantes - UR UPJV 3899 (LTI), Université Sciences et Technologies - Bordeaux 1-Institut Polytechnique de Bordeaux-Centre National de la Recherche Scientifique (CNRS), Université de Rennes 1 (UR1), Université de Rennes (UNIV-RENNES)-Université de Rennes (UNIV-RENNES)-Institut National de la Santé et de la Recherche Médicale (INSERM) |
Rok vydání: | 2020 |
Předmět: |
Cement
Materials science Specific heat 0211 other engineering and technologies 020101 civil engineering 02 engineering and technology Building and Construction Thermal diffusivity 0201 civil engineering Compressive strength Thermal conductivity 021105 building & construction [INFO]Computer Science [cs] General Materials Science Fiber Composite material Civil and Structural Engineering Shrinkage |
Zdroj: | Construction and Building Materials Construction and Building Materials, 2020, 233, ⟨10.1016/j.conbuildmat.2019.117374⟩ Construction and Building Materials, Elsevier, 2020, 233, ⟨10.1016/j.conbuildmat.2019.117374⟩ |
ISSN: | 0950-0618 |
DOI: | 10.1016/j.conbuildmat.2019.117374 |
Popis: | International audience; This study is a continuation of previous work undertaken on a sand concrete lightened by barley straws treated with hot water. Indeed, this type of lightweight concrete presented good thermo-physical properties. But on the other hand, its mechanical properties have been slightly reduced. In order to mechanically strengthen the material, it was decided to incorporate steel fibers in the cement matrix. Thus, we have to develop a new lightweight sand concrete based on hybrid fibers: barley straws and steel fibers. The main objective is therefore to improve the mechanical properties of a lightweight sand concrete, without greatly affecting its thermo-physical properties. Since the effect of the barley straws has already been studied in previous works, the present study mainly focuses on the effect of the steel fibers addition. In order to determine the best compromise between the effect of barley straws and that of steel fibers, different percentages of steel fiber (0%; 0.5%; 1%; 1.5% & 2%), as vol. %, have been investigated. The obtained results showed interesting improvements in the physico-mechanical properties of the studied concrete; these findings were confirmed by a microstructural analysis. The optimal proportion of steel fibers that constitutes the best compromise between the studied properties is 1%. In addition, the compressive strength at 90 days has been improved by about 18%, while slight increases in the thermal conductivity and density have been recorded. The thermal diffusivity has been reduced by about 2% and the specific heat has been increased by about 15%. As for the shrinkage, a reduction of about 30% has been noted. It should be noted that, according to the obtained results, the material still retains its qualities of lightweight concrete. Finally, a microstructural study has revealed that the adhesion between the used fibers and the cement matrix is very good. (C) 2019 Elsevier Ltd. All rights reserved. |
Databáze: | OpenAIRE |
Externí odkaz: |