Mercury capture by a structured Au/C regenerable sorbent under oxycoal combustion representative and real conditions

Autor: C. Gómez-Giménez, M. de las Obras-Loscertales, L.F. de Diego, Francisco García-Labiano, Maria Izquierdo, Juan Adánez
Přispěvatelé: Ministerio de Ciencia e Innovación (España), European Commission, Consejo Superior de Investigaciones Científicas (España)
Rok vydání: 2017
Předmět:
Zdroj: Digital.CSIC. Repositorio Institucional del CSIC
instname
ISSN: 0016-2361
DOI: 10.1016/j.fuel.2017.06.100
Popis: © 2017. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/
The environmental implications of mercury do not correspond only to the emissions to the atmosphere; the quality of the captured CO2 to be transported and sequestered has been subject of research, concerning trace quantities of heavy metals participating in mineralization and precipitation reactions in sequestration conditions. For oxycoal combustion, mercury is not an environmental issue alone but also an operational issue, particularly about where mercury could accumulate within the CO2 processing unit. Therefore, Hg removal is necessary to prevent its attack on the aluminium heat exchangers. In this work, a regenerable sorbent based on carbon supported Au nanoparticles (0.1%wt) has been used for Hg capture under oxycoal combustion atmosphere. The influence of the presence of O2, NO, SO2 and HCl in a gas containing Hg and CO2 on the sorbent as well as on the Hg oxidation (Au can act as an oxidation catalyst) has been evaluated under a simulated flue gas. The presence of either NO or HCl in the simulated flue gas led to mercury oxidation, with oxidized mercury not evolving in the gas, indicating that it is retained on the sorbent; the oxidized mercury is well stabilized on Au surfaces of the sorbent and favours the Hg-Au amalgam formation. This sorbent has been also evaluated in 3 kWth oxycoal bubling fluidized bed combustor. A lignite with high sulphur content was burned in presence of limestone. Despite high SO2 concentration that reached the Au/C sorbent, high capture efficiency was achieved and breakthrough occurred after 3.5 h and 10% breakthrough is not reached during the experiments. Bearing in mind that regeneration time can be adjusted near 1 h, two swing sorbent beds could be used to control mercury emissions under oxycoal combustion conditions.
The financial support from Spanish Ministry of Science and Innovation and European Regional Developments Funds (ENE2011-23412 and CTQ2008-05399/PPQ) is duly recognized. C.Gomez-Giménez thanks CSIC and European Regional Developments Funds for the grant JAE-Pre_077 received. M. de las Obras-Loscertales thanks to MICINN for the F.P.I. fellowship.
Databáze: OpenAIRE
Externí odkaz: