The role of thermal contribution in the design of AA2024 friction stir welded butt and lap joints: mechanical properties and energy demand

Autor: Davide Campanella, Giulia Marcon, Alberto Lombardo, Gianluca Buffa, Livan Fratini
Přispěvatelé: Campanella, Davide, Marcon, Giulia, Lombardo, Alberto, Buffa, Gianluca, Fratini, Livan
Rok vydání: 2022
Předmět:
Zdroj: Production Engineering. 16:247-259
ISSN: 1863-7353
0944-6524
DOI: 10.1007/s11740-022-01107-0
Popis: Although in recent times the use of solid-state welding processes as friction stir welding (FSW) has become increasingly widespread, for some joint morphologies, as lap joints, there are still signifcantly less data available on both process parameters optimization and energy consumption. In the present paper, the authors investigated the possibility of enhancing the joint quality in two diferent confgurations, i.e. lap and butt joints, taking into account specifc thermal contribution (STC) conferred to the weld. Strength, micro-hardness and microstructure were evaluated on the produced AA2024 aluminum alloys butt and lap joints. The surface response method (RSM) was used to investigate the efects of the main process parameters and to identify optimal technological parameters in terms of joint resistance, while the specifc energy consumption (SEC) of the entire process was acquired with the aim to provide design guidelines taking into account, at the same time, mechanical performance and environmental impact. It was found that the same optimal range of revolutionary pitch can be identifed for both the confgurations. Additionally, maximizing welding speed, for a given revolutionary pitch, contributes to signifcantly reduce the environmental impact of the process with no detrimental effect on the joint performance.
Databáze: OpenAIRE
Externí odkaz: