Metal 3D-printed wick structures for heat pipe application: Capillary performance analysis
| Autor: | Bernardus J. Geurts, Davoud Jafari, Wessel W. Wits |
|---|---|
| Rok vydání: | 2018 |
| Předmět: |
Pressure drop
Materials science Capillary action Additive Manufacturing 020209 energy UT-Hybrid-D capillary performance Energy Engineering and Power Technology Reynolds number 02 engineering and technology Penetration (firestop) Porous structure 021001 nanoscience & nanotechnology Permeability Industrial and Manufacturing Engineering Heat pipe symbols.namesake Heat transfer 0202 electrical engineering electronic engineering information engineering symbols Working fluid Composite material 0210 nano-technology Porosity |
| Zdroj: | Applied thermal engineering, 143, 403-414. Elsevier |
| ISSN: | 1359-4311 |
| DOI: | 10.1016/j.applthermaleng.2018.07.111 |
| Popis: | This paper examines the so-called capillary performance of a freeform porous structure fabricated by advanced 3D metal printing technology. The fabricated structure is intended as wick for two-phase heat transfer devices, in which it contributes to the transport of a liquid working fluid through capillary forces. A stainless steel porous structure is additively manufactured and characterized in terms of its porosity (e), effective pore radius (reff), liquid permeability (K) and capillary performance (K/reff). Forced liquid flow tests with deionized water as working fluid are conducted to determine the permeability. Capillary penetration experiments are performed by means of height-time (h-t) and weight-time (w-t) techniques with different fluids to characterize the capillary performance of the printed wicks. The experimentally determined values of permeability and pressure drop are compared with the well-known Darcy’s law and Forchheimer corrections. The Kozeny–Carman correlation is found to predict the experimental values of permeability at lower flow velocities (0.07 m/s corresponding to a Reynolds number of 0.95), while at higher velocities an under-prediction of the experimental data is observed. The Kozeny-like model taking into account inertial effects is updated in terms of constant values that fit with the experimental data very well. The accuracy of the theoretical models for characterizing capillary rate-or-rise processes is also assessed. It is concluded that the capillary penetration of liquids in the 3D-printed wick follows the law: h(t) ∼ t1/3 at intermediate stage. Observation confirms that the gravitational effect played a significant role in the 3D-printed wick, introducing slower capillary rising. Compared to sintered powder, screen mesh and composite wicks selected from literature, the designed 3D-printed wick enhances the capillary performance. It is concluded that due to the large permeability and capillary performance (K/reff), heat pipes in conjunction with a 3D-printed wick can significantly augment their heat transfer. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect