| Autor: |
Nguyen Thi Quoc Dung, Trinh Kieu Tuan, Nguyen Huu Quang, He Le Hoang Anh, Nguyen Huu Luan, Tran Minh Truong |
| Rok vydání: |
2021 |
| Předmět: |
|
| Zdroj: |
E3S Web of Conferences, Vol 309, p 01019 (2021) |
| ISSN: |
2267-1242 |
| Popis: |
060A4 steel (Chinese standard) is a steel with good machinability, which is very popularly used in mechanical engineering. Therefore, the study of solutions for improvement of quality and productivity when machining this steel type has great technical and economic significance. In this study, the multi-objective optimization process has been performed when milling this steel type on a vertical milling machine. The cutting tool is a face milling cutter made of High Speed Steel (HSS) material. The effect of spindle speed, feed rate, and cutting depth on surface roughness has been found. The combination of the Taguchi method and PSI method has been applied to determine the optimal value of three input parameters to simultaneously ensure the two criteria of the minimum surface roughness and the maximum Material Removal Rate (MRR). The works which will be done by the authors of this article in the near future has also been presented in the last part of this study. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
