Effect of Reheating and Quenching on the Cathodoluminescence Intensity of Free Lime in Steelmaking Slag
| Autor: | Makoto Nagasako, Kazuaki Wagatsuma, Susumu Imashuku |
|---|---|
| Rok vydání: | 2021 |
| Předmět: |
Quenching
Materials science business.industry 0211 other engineering and technologies Analytical chemistry chemistry.chemical_element Slag Cathodoluminescence 02 engineering and technology engineering.material 021001 nanoscience & nanotechnology Microstructure Oxygen Steelmaking chemistry visual_art engineering visual_art.visual_art_medium 0210 nano-technology Luminescence business Instrumentation 021102 mining & metallurgy Lime |
| Zdroj: | Microscopy and Microanalysis. 27:484-490 |
| ISSN: | 1435-8115 1431-9276 |
| Popis: | Determining free lime content in steelmaking slag is crucial for its safe reuse in road construction. A simple method has been recently developed to rapidly derive this value via cathodoluminescence (CL) imaging of steelmaking slag, previously quenched from 1,000°C to room temperature, according to the illuminated areas corresponding to free lime (luminescence peak at 600 nm). This quenching is required to obtain intense CL from free lime, but the mechanism of such signal enhancement is still unknown. Therefore, the present study investigated the mechanism by comparing the microstructures, CL images, and CL spectra of free lime in quenched and unquenched steelmaking slag. Large amounts of defects, including dislocations, were observed in the free lime emitting intense luminescence at 600 nm, whereas the samples without clear CL exhibited only a few defects. These results and previous studies suggest that the luminescence at 600 nm from free lime is enhanced by the CL originating from oxygen vacancies (380 nm); therefore, the enhancement of the intensity of the free lime CL peak could be attributed to the increase in the oxygen vacancies via quenching from 1,000°C to room temperature. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|