Repair Bond Strength of High-viscosity Glass-ionomer Cements Using Resin Composite Bonded with Light- and Self-cured Adhesive Systems

Autor: H A El-Deeb, E H Mobarak
Rok vydání: 2021
Předmět:
Zdroj: Operative Dentistry. 46:45-53
ISSN: 1559-2863
0361-7734
DOI: 10.2341/19-186-l
Popis: Clinical Relevance High-viscosity glass-ionomer cements (HVGICs) used with atraumatic restorative treatment can be repaired with light- or self-cured adhesive systems; however, the repair bond strength of two-step, self-etching and one-step adhesives in the light-cure mode surpass one-step self-cure adhesives. Working on a feasible self-cure approach in the absence of such in rural areas as well as in war zones is of prime importance. SUMMARY Objectives: Despite the success rate of high-viscosity glass-ionomer cements (HVGICs) used in atraumatic restorative treatment (ART) restorations, partial or bulk fracture of the proximal portion has been recorded to be one of the main causes of proximal restoration failures. Repair of these restorative materials requires a practical solution, especially in cases where there is a lack of electricity. Thus, the purpose of this study was to evaluate the repair microshear bond strength (μSBS) of three HVGICs using a resin composite in association with adhesive systems having different curing modes (ie, light- vs self-curing mode). Methods and Materials: A total of 105 discs (12 mm in diameter and 2 mm thick) of three HVGICs: GC Fuji IX GP Fast (GC Corporation, Tokyo, Japan); Fuji IX GP glass-ionomer cement containing chlorhexidine (GC Corporation, Tokyo, Japan); and ChemFil Rock zinc-reinforced HVGIC (Dentsply De-Trey GmbH, Konstanz, Germany) were prepared. Each specimen was divided into three horizontal sections, according to the tested adhesive system or curing mode: Clearfil SE Bond 2 (two-step, self-etch adhesive); (Kuraray Noritake Dental Inc., Tokyo, Japan) in light-cure mode; Clearfil Universal Bond (one-step, self-etch adhesive); (Kuraray Noritake Dental Inc., Tokyo, Japan) in light-cure mode; or Clearfil Universal Bond (one-step, self-etch adhesive); (Kuraray Noritake Dental Inc., Tokyo, Japan) in self-cure mode, mixing it with Clearfil DC Activator (Kuraray Noritake Dental Inc., Tokyo, Japan). A resin composite microcylinder was bonded to each horizontal section of each specimen using starch tubes. The bonded discs were stored in artificial saliva at 37°C for 24 hours. A μSBS test was conducted using a universal testing machine, while failure modes were determined using scanning electron microscopy. Data were statistically analyzed using two-way analysis of variance (ANOVA), one-way ANOVA, and Bonferroni post hoc tests (α=0.05). Results: Two-way ANOVA revealed a statistically significant effect for the adhesive systems (p Conclusions: The three tested HVGICs can be successfully repaired using two-step or one-step self-etch adhesive systems. The one-step self-etch adhesive system in light-cure mode is preferred when compared with the self-cure mode.
Databáze: OpenAIRE
Externí odkaz: