Improvement of fire door design using experimental and numerical modelling investigations
| Autor: | Mohamed A. Aziz, Saber Abdo, Mohamed A. Khalifa, Mohamed Hamza, Osama A. Gaheen |
|---|---|
| Rok vydání: | 2021 |
| Předmět: |
Fire test
Computer simulation business.industry Mechanical Engineering Fire door Structural engineering fire resistance standard furnace test Deformation (meteorology) Finite element method Mechanics of Materials Thermocouple fire door designs Transient (oscillation) thermal performance Safety Risk Reliability and Quality Reduction (mathematics) business finite element modelling fire test Mathematics |
| Zdroj: | Abdallah, S R, Khalifa, M A K, Aziz, M A, Hamza, M & Gaheen, O 2021, ' Improvement of fire door design using experimental and numerical modelling investigations ', Journal of Structural Fire Engineering . https://doi.org/10.1108/JSFE-07-2021-0048 |
| ISSN: | 2040-2317 |
| Popis: | PurposeFire door should withstand a high temperature without deforming. In the current paper, the challenges of improving the behaviour of the conventional fire door were described using various internal stiffeners in pair swinging-type fire door.Design/methodology/approachThe temperature distribution on the outside door surface was measured with distributed eight thermocouples. Subsequently the internal side was cooled with pressurized water hose jet stream of 4 bar. The transient simulation for the thermal and structure analysis was conducted using finite element modelling (FEM) with ANSYS 19. The selected cross sections during numerical simulation were double S, double C and hat omega stiffeners applied to 2.2 m and 3 m door length.FindingsDuring the FEM analysis, the maximum deformations were 7.2028, 5.4299, 5.023 cm for double S, double C and hat omega stiffeners for 2.2 m door length and 6.57, 4.26, 2.1094 cm for double S, double C and hat omega stiffeners for 3 m door length. Finally, hat omega gives more than three times reduction in the deformation of door compared to double S stiffeners which provided a reference data to the manufacturers.Research limitations/implicationsThe research limitation included the limited number of fire door tests due to the high cost of single test, and the research implication was to achieve an optimal study in fire door design.Practical implicationsAchieving the optimum design for the internal door stiffeners where the hat omega stiffener gives minimum door deformation compared to the other stiffeners was considered the practical implication. The work included two experimental fire door tests according to the standard fire test (ANSI/UL 10C – Positive Pressure of Fire Tests of Door Assemblies) for a door of 2.2 m length with double S stiffeners and a door of 3 m length with hat omega stiffeners, which achieved minimum deformation.Originality/valueThe behavior and mechanical response of door leaf were improved through using internal hat omega stiffeners under fire testing. This study was achieved using FEM in ANSYS 19 for six cases of different lengths and stiffeners for fire doors. The simulation model showed a very close agreement with the experimental results with an error of 0.651% for double S and 1.888% for hat omega. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|