Detailed experimental validation and benchmarking of six models for longitudinal tensile failure of unidirectional composites
| Autor: | Josep Costa, J.M. Guerrero, C. Le Bourlot, Arsen Melnikov, Larissa Gorbatikh, L.N. McCartney, Stepan Vladimirovitch Lomov, A.B. de Morais, Christian Breite, W. Van Paepegem, Mark Mavrogordato, Rodrigo P. Tavares, S.M. Spearing, Ian Sinclair, Mahoor Mehdikhani, Erich Schöberl, F. Otero, Yentl Swolfs, Soraia Pimenta, J.A. Mayugo, Eric Maire, Albert Turon, Pedro P. Camanho, Francisco Mesquita, M. Hajikazemi |
|---|---|
| Přispěvatelé: | Institute for Physics of Microstructures of the RAS, Russian Academy of Sciences [Moscow] (RAS), Matériaux, ingénierie et science [Villeurbanne] (MATEIS), Université Claude Bernard Lyon 1 (UCBL), Université de Lyon-Université de Lyon-Institut National des Sciences Appliquées de Lyon (INSA Lyon), Université de Lyon-Institut National des Sciences Appliquées (INSA)-Institut National des Sciences Appliquées (INSA)-Centre National de la Recherche Scientifique (CNRS), Universidade Federal do Rio Grande do Sul [Porto Alegre] (UFRGS), Institut de Recherches sur les lois Fondamentales de l'Univers (IRFU), Commissariat à l'énergie atomique et aux énergies alternatives (CEA)-Université Paris-Saclay, Sexe et évolution, Département PEGASE [LBBE] (PEGASE), Laboratoire de Biométrie et Biologie Evolutive - UMR 5558 (LBBE), Université de Lyon-Université de Lyon-Institut National de Recherche en Informatique et en Automatique (Inria)-VetAgro Sup - Institut national d'enseignement supérieur et de recherche en alimentation, santé animale, sciences agronomiques et de l'environnement (VAS)-Centre National de la Recherche Scientifique (CNRS)-Université Claude Bernard Lyon 1 (UCBL), Université de Lyon-Université de Lyon-Institut National de Recherche en Informatique et en Automatique (Inria)-VetAgro Sup - Institut national d'enseignement supérieur et de recherche en alimentation, santé animale, sciences agronomiques et de l'environnement (VAS)-Centre National de la Recherche Scientifique (CNRS)-Laboratoire de Biométrie et Biologie Evolutive - UMR 5558 (LBBE), Université de Lyon-Université de Lyon-Institut National de Recherche en Informatique et en Automatique (Inria)-VetAgro Sup - Institut national d'enseignement supérieur et de recherche en alimentation, santé animale, sciences agronomiques et de l'environnement (VAS)-Centre National de la Recherche Scientifique (CNRS), Catholic University of Leuven - Katholieke Universiteit Leuven (KU Leuven), Universitat de Girona (UdG), Centre National de la Recherche Scientifique (CNRS)-Université Claude Bernard Lyon 1 (UCBL), Université de Lyon-Institut National des Sciences Appliquées (INSA)-Institut National des Sciences Appliquées (INSA), AEI, Universitat Politècnica de Catalunya. Departament de Ciència i Enginyeria Nàutiques, Universitat Politècnica de Catalunya. MMCE - Mecànica de Medis Continus i Estructures |
| Jazyk: | angličtina |
| Rok vydání: | 2022 |
| Předmět: |
Polymer-matrix composites (PMCs)
Technology Engineering Carbon fiber-reinforced plastics Assaigs de materials MECHANICAL CHARACTERIZATION 02 engineering and technology Materials testing European Social Fund [SPI.MAT]Engineering Sciences [physics]/Materials 0203 mechanical engineering Polymeric composites [SPI.MECA.MEMA]Engineering Sciences [physics]/Mechanics [physics.med-ph]/Mechanics of materials [physics.class-ph] Fracture mechanics Composite material media_common Plàstics reforçats amb fibra de carboni PMCs CARBON-FIBERS Scope (project management) IN-SITU Composite materials Benchmarking Experimental validation 021001 nanoscience & nanotechnology STRENGTH MODELS 020303 mechanical engineering & transports Materials Science Composites HIERARCHICAL SCALING LAW 0210 nano-technology Technology and Engineering Materials Science Mechanics Mecànica de fractura media_common.cataloged_instance COMPUTED-TOMOGRAPHY European union Strength of materials Compostos polimèrics Resistència de materials Civil and Structural Engineering Material modelling STRESS-CONCENTRATIONS X-ray computed tomography Science & Technology Materials compostos FIBER-REINFORCED COMPOSITES business.industry Polymer-matrix composites Materials -- Testing Enginyeria dels materials::Materials compostos [Àrees temàtiques de la UPC] Fracture Technical university Ceramics and Composites BROKEN FIBERS business FINITE-ELEMENT |
| Zdroj: | Composite Structures Composite Structures, 2022, 279, ⟨10.1016/j.compstruct.2021.114828⟩ Composite Structures, 2022, 279, pp.114828. ⟨10.1016/j.compstruct.2021.114828⟩ COMPOSITE STRUCTURES © Composite Structures, 2021, art. núm. 114828 Articles publicats (D-F) DUGiDocs – Universitat de Girona instname |
| ISSN: | 0263-8223 1879-1085 |
| DOI: | 10.1016/j.compstruct.2021.114828⟩ |
| Popis: | Longitudinal tensile failure of unidirectional fibre-reinforced composites remains difficult to predict accurately. The key underlying mechanism is the tensile failure of individual fibres. This paper objectively measured the relevant input data and performed a detailed experimental validation of blind predictions of six state-of-the-art models using high-resolution in-situ synchrotron radiation computed tomography (SRCT) measurements on two carbon fibre/epoxy composites. Models without major conservative assumptions regarding stress redistributions around fibre breaks significantly overpredicted failure strains and strengths, but predictions of models with at least one such assumption were in better agreement for those properties. Moreover, all models failed to predict fibre break (and cluster) development accurately, suggesting that it is vital to improve experimental methods to characterise accurately the in-situ strength distribution of fibres within the composites. As a result of detailed measurements of all required input parameters and advanced SRCT experiments, this paper establishes a benchmark for future research on longitudinal tensile failure The research leading to these results has been conducted in the framework of the FiBreMoD project and has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 722626. Compressive tests on the neat epoxy resin were performed at the mechanical lab of the Institute of Mechanics, Materials and Civil Engineering (IMMC), Université Catholique de Louvain (UCLouvain) with the kind support of J. Chevalier and T. Pardoen. M.J. Emerson from QIM, Technical University of Denmark (DTU) is thankfully acknowledged for the handson training sessions and support of the Insegt Fibre segmentation toolbox. Support of C. Schlepütz from TOMCAT beamline at Swiss Light Source for optimising the acquisition settings during the beamtimes under proposal IDs 20161157 and 20171494 is thankfully acknowledged. J.M. Guerrero would like to acknowledge the grant BES-2016-078270 from the ‘Subprograma Estatal de Formación del MICINN’ cofinanced by the European Social Fund, and all authors from the University of Girona acknowledge the funding from the Spanish project RTI2018-097880-B-I00. The work of M. Hajikazemi forms part of the research programme of DPI, project 812T17. S. Pimenta acknowledges the funding from the Royal Academy of Engineering in the scope of her Research Fellowship on “Multiscale discontinuous composites for high-volume and sustainable applications” (2015-2019). R.P. Tavares and P.P. Camanho would like to thank the financial support provided by FCT - Fundação para a Ciência e a Tecnologia through National Funds in the scope of project MITP-TB/PFM/0005/2013 |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect