Experimental Investigation of the Rheological Behavior of an Oil-Based Drilling Fluid with Rheology Modifier and Oil Wetter Additives
| Autor: | Muhammad Shahzad Kamal, Mohammed D. Al-Ajmi, Sagheer A. Onaizi, Mobeen Murtaza, Mohamed Mahmoud, Sulaiman A. Alarifi |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2021 |
| Předmět: |
Materials science
Organic Chemistry Pharmaceutical Science Drilling drilling fluids flat rheology Article rheology modifier Analytical Chemistry QD241-441 Brine Rheology oil wetter Chemistry (miscellaneous) Drilling fluid Drug Discovery Emulsion Zeta potential Molecular Medicine Physical and Theoretical Chemistry Composite material Dispersion (chemistry) oil-based drilling fluid Oil shale |
| Zdroj: | Molecules Volume 26 Issue 16 Molecules, Vol 26, Iss 4877, p 4877 (2021) |
| ISSN: | 1420-3049 |
| DOI: | 10.3390/molecules26164877 |
| Popis: | Drilling issues such as shale hydration, high-temperature tolerance, torque and drag are often resolved by applying an appropriate drilling fluid formulation. Oil-based drilling fluid (OBDF) formulations are usually composed of emulsifiers, lime, brine, viscosifier, fluid loss controller and weighting agent. These additives sometimes outperform in extended exposure to high pressure high temperature (HPHT) conditions encountered in deep wells, resulting in weighting material segregation, high fluid loss, poor rheology and poor emulsion stability. In this study, two additives, oil wetter and rheology modifier were incorporated into the OBDF and their performance was investigated by conducting rheology, fluid loss, zeta potential and emulsion stability tests before and after hot rolling at 16 h and 32 h. Extending the hot rolling period beyond what is commonly used in this type of experiment is necessary to ensure the fluid’s stability. It was found that HPHT hot rolling affected the properties of drilling fluids by decreasing the rheology parameters and emulsion stability with the increase in the hot rolling time to 32 h. Also, the fluid loss additive’s performance degraded as rolling temperature and time increased. Adding oil wetter and rheology modifier additives resulted in a slight loss of rheological profile after 32 h and maintained flat rheology profile. The emulsion stability was slightly decreased and stayed close to the recommended value (400 V). The fluid loss was controlled by optimizing the concentration of fluid loss additive and oil wetter. The presence of oil wetter improved the carrying capacity of drilling fluids and prevented the barite sag problem. The zeta potential test confirmed that the oil wetter converted the surface of barite from water to oil and improved its dispersion in the oil. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|