Numerical Simulation of the Depressurization Process of a Natural Gas Hydrate Reservoir: An Attempt at Optimization of Field Operational Factors with Multiple Wells in a Real 3D Geological Model
| Autor: | Zhang Jianguang, Sun Qiang, Zhixue Sun, Shuhuan Lv, Xin Ying, Ruolong Ma, Cai Mingyu, Wang Haoxuan |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2016 |
| Předmět: |
geological model
Control and Optimization 020209 energy Clathrate hydrate Perforation (oil well) Energy Engineering and Power Technology gas hydrate 02 engineering and technology lcsh:Technology Methane chemistry.chemical_compound 020401 chemical engineering Cabin pressurization Natural gas depressurization method 0202 electrical engineering electronic engineering information engineering 0204 chemical engineering Electrical and Electronic Engineering Engineering (miscellaneous) Shenhu Area Computer simulation Petroleum engineering Renewable Energy Sustainability and the Environment business.industry lcsh:T Drilling simulation chemistry Environmental science business Peak gas Energy (miscellaneous) |
| Zdroj: | Energies, Vol 9, Iss 9, p 714 (2016) Energies; Volume 9; Issue 9; Pages: 714 |
| ISSN: | 1996-1073 |
| Popis: | Natural gas hydrates, crystalline solids whose gas molecules are so compressed that they are denser than a typical fluid hydrocarbon, have extensive applications in the areas of climate change and the energy crisis. The hydrate deposit located in the Shenhu Area on the continental slope of the South China Sea is regarded as the most promising target for gas hydrate exploration in China. Samples taken at drilling site SH2 have indicated a high abundance of methane hydrate reserves in clay sediments. In the last few decades, with its relatively low energy cost, the depressurization gas recovery method has been generally regarded as technically feasible and the most promising one. For the purpose of a better acquaintance with the feasible field operational factors and processes which control the production behavior of a real 3D geological CH4-hydrate deposit, it is urgent to figure out the effects of the parameters such as well type, well spacing, bottom hole pressure, and perforation intervals on methane recovery. One years’ numerical simulation results show that under the condition of 3000 kPa constant bottom hole pressure, 1000 m well spacing, perforation in higher intervals and with one horizontal well, the daily peak gas rate can reach 4325.02 m3 and the cumulative gas volume is 1.291 × 106 m3. What’s more, some new knowledge and its explanation of the curve tendency and evolution for the production process are provided. Technically, one factor at a time design (OFAT) and an orthogonal design were used in the simulation to investigate which factors dominate the productivity ability and which is the most sensitive one. The results indicated that the order of effects of the factors on gas yield was perforation interval > bottom hole pressure > well spacing. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|