RELAP5 and SIMMER-III code assessment on CIRCE decay heat removal experiments
| Autor: | Paride Meloni, Massimiliano Polidori, Ivan Di Piazza, Mariano Tarantino, Giacomino Bandini |
|---|---|
| Přispěvatelé: | Di Piazza, I., Tarantino, M., Meloni, P., Polidori, M., Bandini, G. |
| Rok vydání: | 2015 |
| Předmět: |
Nuclear and High Energy Physics
Engineering Natural convection business.industry Mechanical Engineering Nuclear engineering Heat sink Computational fluid dynamics Coolant Nuclear Energy and Engineering Nuclear fission Heat exchanger General Materials Science Transient (oscillation) Decay heat Safety Risk Reliability and Quality business Waste Management and Disposal Simulation |
| Zdroj: | Nuclear Engineering and Design. 281:39-50 |
| ISSN: | 0029-5493 |
| Popis: | In the frame of THINS Project of the 7th Framework EU Program on Nuclear Fission Safety, some experiments were carried out on the large scale LBE-cooled CIRCE facility at the ENEA/Brasimone Research Center to investigate relevant safety aspects associated with the removal of decay heat through heat exchangers (HXs) immersed in the primary circuit of a pool-type lead fast reactor (LFR), under loss of heat sink (LOHS) accidental conditions. The start-up and operation of this decay heat removal (DHR) system relies on natural convection on the primary side and then might be affected by coolant mixing and temperature stratification phenomena occurring in the LBE pool. The main objectives of the CIRCE experimental campaign were to verify the behavior of the DHR system under representative accidental conditions and provide a valuable database for the assessment of both CFD and system codes. The reproduced accidental conditions refer to a station blackout scenario, namely a protected LOHS and loss of flow (LOF) transient. In this paper the results of 1D RELAP5 and 2D SIMMER-III simulations are compared with the experimental data of more representative DHR transients T-4 and T-5 in order to verify the capability of these codes to reproduce both forced and natural convection conditions observed in the primary circuit and the right operation of the DHR system for decay heat removal. Both codes are able to reproduce the stationary conditions and with some uncertainties the transition to natural convection conditions until the end of the transient phase. The trend of temperature stratification in the LBE pool during both forced and natural convection conditions is rather well reproduced by the codes. The largest uncertainties of the simulation concern the DHR heat exchanger behavior, which showed large instabilities in its operation during the tests. © 2014 Elsevier B.V. All rights reserved. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect