Strain Monitoring System for Steel and Concrete Structures
| Autor: | E. Cheilakou, Yannis Damigos, C. Bouklas, Dmitry Rychkov, D. Kourousis, N. Tsopelas, Angelos Amditis, Bernd Frankenstein Frankenstein, A. Anastasopoulos, Reimund Gerhard |
|---|---|
| Rok vydání: | 2018 |
| Předmět: |
Bending (metalworking)
Computer science 0211 other engineering and technologies 020101 civil engineering 02 engineering and technology Data acquisition unit Automotive engineering Bridge (nautical) Field (computer science) 0201 civil engineering 11. Sustainability 021105 building & construction Management system Structural health monitoring Strain monitoring Beam (structure) Earth-Surface Processes |
| Zdroj: | Procedia Structural Integrity |
| Popis: | The present work is part of a collaborative H2020 European funded research project called SENSKIN, that aims to improve Structural Health Monitoring (SHM) for transport infrastructure through the development of an innovative monitoring and management system for bridges based on a novel, inexpensive, skin-like sensor. The integrated SENSKIN technology will be implemented in the case of steel and concrete bridges, and tested, field-evaluated and benchmarked on actual bridge environment against a conventional health monitoring solution developed by Mistras Group Hellas. The main objective of the present work is to implement the autonomous, fully functional strain monitoring system based on commercially available off-the-shelf components, that will be used to accomplish direct comparison between the performance of the innovative SENSKIN sensors and the conventional strain sensors commonly used for structural monitoring of bridges. For this purpose, the mini Structural Monitoring System (mini SMS) of Physical Acoustics Corporation, a comprehensive data acquisition unit designed specifically for long-term unattended operation in outdoor environments, was selected. For the completion of the conventional system, appropriate foil-type strain sensors were selected, driven by special conditioners manufactured by Mistras Group. A comprehensive description of the strain monitoring system and its peripheral components is provided in this paper. For the evaluation of the integrated system’s performance and the effect of various parameters on the long-term behavior of sensors, several test steel pieces instrumented with different strain sensors configurations were prepared and tested in both laboratory and field ambient conditions. Furthermore, loading tests were performed aiming to validate the response of the system in monitoring the strains developed in steel beam elements subject to bending regimes. Representative results obtained from the above experimental tests have been included in this paper as well. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|