Application of Taguchi method for determining optimum surface roughness in turning of high-alloy white cast iron
| Autor: | Mustafa Günay, Emre Yücel |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2013 |
| Předmět: |
Optimization
Materials science Applied Mathematics Design of experiments Metallurgy engineering.material Condensed Matter Physics Machining chemistry.chemical_compound Taguchi methods Surface roughness chemistry Boron nitride visual_art Ni-Hard engineering visual_art.visual_art_medium Cast iron Ceramic Electrical and Electronic Engineering Orthogonal array Tool materials Instrumentation |
| Popis: | WOS: 000314428600009 This paper focused on optimizing the cutting conditions for the average surface roughness (R-a) obtained in machining of high-alloy white cast iron (Ni-Hard) at two different hardness levels (50 HRC and 62 HRC). Machining experiments were performed at the CNC lathe using ceramic and cubic boron nitride (CBN) cutting tools on Ni-Hard materials. Cutting speed, feed rate and depth of cut were chosen as the cutting parameters. Taguchi L-18 orthogonal array was used to design of experiment. Optimal cutting conditions was determined using the signal-to-noise (S/N) ratio which was calculated for R-a according to the "the-smaller-the-better" approach. The effects of the cutting parameters and tool materials on surface roughness were evaluated by the analysis of variance. The statistical analysis indicated that the parameters that have the biggest effect on R-a for Ni-Hard materials with 50 HRC and 62 HRC are the cutting speed and feed rate, respectively. Additionally, the optimum cutting conditions for the materials with 50 HRC and 62 HRC was found at different levels. (C) 2012 Elsevier Ltd. All rights reserved. Scientific Research Project Unit of Karabuk UniversityKarabuk University [KBU-BAP-C-11-Y 027] This study is supported by Scientific Research Project Unit of Karabuk University (KBU-BAP-C-11-Y 027), the authors express appreciation for this support. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|