The Effect of Surface Treatment with Isocyanate and Aromatic Carbodiimide of Thermally Expanded Vermiculite Used as a Functional Filler for Polylactide-Based Composites
| Autor: | Radosław Biskup, Aleksander Hejna, Olga Mysiukiewicz, Mateusz Barczewski, Adam Piasecki, Joanna Szulc, Arkadiusz Kloziński, Sławomir Michałowski |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2021 |
| Předmět: |
Thermogravimetric analysis
Materials science Polymers and Plastics vermiculite General Chemistry Dynamic mechanical analysis surface treatment Vermiculite mechanical properties Article lcsh:QD241-441 Differential scanning calorimetry lcsh:Organic chemistry polylactide Thermomechanical analysis Surface modification Heat deflection temperature composite Composite material Fourier transform infrared spectroscopy |
| Zdroj: | Polymers, Vol 13, Iss 890, p 890 (2021) Polymers Volume 13 Issue 6 |
| ISSN: | 2073-4360 |
| Popis: | In this work, thermally expanded vermiculite (TE-VMT) was surface modified and used as a filler for composites with a polylactide (PLA) matrix. Modification of vermiculite was realized by simultaneous ball milling with the presence of two PLA chain extenders, aromatic carbodiimide (KI), and 4,4’-methylenebis(phenyl isocyanate) (MDI). In addition to analyzing the particle size of the filler subjected to processing, the efficiency of mechanochemical modification was evaluated by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The composites of PLA with three vermiculite types were prepared by melt mixing and subjected to mechanical, thermomechanical, thermal, and structural evaluation. The structure of composites containing a constant amount of the filler (20 wt%) was assessed using FTIR spectroscopy and SEM analysis supplemented by evaluating the final injection-molded samples’ physicochemical properties. Mechanical behavior of the composites was assessed by static tensile test and impact strength hardness measurements. Heat deflection temperature (HDT) test and dynamic thermomechanical analysis (DMTA) were applied to evaluate the influence of the filler addition and its functionalization on thermomechanical properties of PLA-based composites. Thermal properties were assessed by differential scanning calorimetry (DSC), pyrolysis combustion flow calorimetry (PCFC), and thermogravimetric analysis (TGA). The use of filler-reactive chain extenders (CE) made it possible to change the vermiculite structure and obtain an improvement in interfacial adhesion and more favorable filler dispersions in the matrix. This translated into an improvement in impact strength and an increase in thermo-mechanical stability and heat release capacity of composites containing modified vermiculites. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|