Study of a coupled adsorption/electro-oxidation process as a tertiary treatment for tequila industry wastewater
Autor: | Jesús Castillo-Monroy, Luis A. Godínez, Irma Robles, Arturo Estrada-Vargas |
---|---|
Rok vydání: | 2020 |
Předmět: |
Health
Toxicology and Mutagenesis Vinasse Electrolyte Wastewater 010501 environmental sciences Waste Disposal Fluid 01 natural sciences Adsorption medicine Environmental Chemistry Solubility 0105 earth and related environmental sciences Biological Oxygen Demand Analysis Chemistry Chemical oxygen demand Hydrogen Peroxide General Medicine Pulp and paper industry Pollution Sewage treatment Oxidation-Reduction Water Pollutants Chemical Activated carbon medicine.drug |
Zdroj: | Environmental Science and Pollution Research. 28:23699-23706 |
ISSN: | 1614-7499 0944-1344 |
DOI: | 10.1007/s11356-020-11031-4 |
Popis: | Vinasse wastewater from tequila industry that has been conventionally treated is usually characterized by a chemical oxygen demand (COD) above 150 mg L−1, which is the maximum content permitted for discharge by Mexican Regulation. In order to increase the wastewater quality, different processes were applied, and from the experimental results, the advantages and limitations were analyzed. In this way, although Fenton experiments showed acceptable COD removal efficiencies (79–90%), operation as well as cost limit its adoption as a viable technology. Therefore, additional experiments explored electro-Fenton (EF) as well as adsorption coupled to EF in a tubular reactor. The corresponding data revealed that there was no additional increase in COD removal performance probably due to the low oxygen solubility in the electrolytic solution and the high pH that prevents the existence of Fe2+ ions necessary for the Fenton mixture. In view of these results, when an activated carbon (AC) filter was coupled to polarization at current densities between 0.5 and 2 mA cm−2, removal efficiencies from 71 to 81%, corresponding to final COD of 78 to 33 mg L−1, were achieved. Also, the adsorbent surface was continuously regenerated, promoting a more efficient adsorption and a longer service life for the AC filter. In this case, by using a current density of 0.5 mA cm−2, COD was reduced to sufficiently small values for discharge into natural water bodies, maintaining low energy consumption and therefore acceptable operation costs. |
Databáze: | OpenAIRE |
Externí odkaz: |