Determination of methane, ethane and propane on activated carbons by experimental pressure swing adsorption method
| Autor: | David Bessieres, Camelia Matei Ghimbeu, David Pino-Perez, Deneb Peredo-Mancilla, Joseph Diaz, Bich Ngoc Ho, Cecile Hort |
|---|---|
| Přispěvatelé: | Institut de Sciences des Matériaux de Mulhouse |
| Jazyk: | angličtina |
| Rok vydání: | 2021 |
| Předmět: |
Langmuir
Materials science 020209 energy Energy Engineering and Power Technology 02 engineering and technology chemistry.chemical_compound symbols.namesake Adsorption 020401 chemical engineering Propane Specific surface area 0202 electrical engineering electronic engineering information engineering medicine [CHIM]Chemical Sciences 0204 chemical engineering ComputingMilieux_MISCELLANEOUS Langmuir adsorption model Microporous material Geotechnical Engineering and Engineering Geology Pressure swing adsorption Fuel Technology chemistry Chemical engineering symbols Activated carbon medicine.drug |
| Zdroj: | Journal of Natural Gas Science and Engineering Journal of Natural Gas Science and Engineering, Elsevier, 2021, 95, pp.104124. ⟨10.1016/j.jngse.2021.104124⟩ |
| ISSN: | 1875-5100 2212-3865 |
| DOI: | 10.1016/j.jngse.2021.104124⟩ |
| Popis: | This study focuses on isotherms adsorption of natural gas components i.e. methane, ethane, and propane on five commercial activated carbons to determine their different behaviors towards each compound. These five commercial activated carbons have different textures that are supposed to affect their adsorption capacity. The experiments were carried out at 303 K within a pressure range of 0–3 MPa using a homemade manometric adsorption device. A comprehensive process was also detailed with a step-by-step calculation. The obtained data were then fitted into the modified Langmuir model in order to justify the mono-layer coverage. Hence, the relationship between the Langmuir adsorption capacities and different textural properties were plotted, and only the specific area showed its direct influence. The outcome also turned out that the most promising activated carbon is the one that possesses not only the highest specific surface area but also has an adequate balance between the microporous and mesoporous volumes. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect