| Autor: |
Songnian Tan, Quanchao Li, Yongsen Xu, Honghai Shen, Yanping Cheng, Ping Jia, Yulei Xu |
| Rok vydání: |
2022 |
| Předmět: |
|
| Zdroj: |
Applied optics. 61(9) |
| ISSN: |
1539-4522 |
| Popis: |
This paper proposes a design process for additively manufactured mirrors. A central support aspheric mirror and tripod support structure were manufactured via selective laser melting. To achieve substantial weight reduction, an additively manufactured body-centered cubic lattice structure was used in the mirror design. Simulation analysis showed that the mirror had good rigidity. Single-point diamond turning was applied to obtain an optical quality mirror. After assembly, the rms surface shape accuracy of the mirror was 0.069 λ ( λ = 632.8 n m ). The surface roughness (Ra) of the additively manufactured metal mirror was 8.125 nm. These findings provide a strong theoretical basis and technical support for the preparation and application of lightweight metal mirrors. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
