Strontium carbonate solubility data in aqueous mixtures of monoethyleneglycol under a carbon dioxide atmosphere
Autor: | Naíra S. de A. Maniçoba, Osvaldo Chiavone-Filho, Leonardo S. Pereira, Rony Oliveira de Sant'ana, Fedra A. V. Ferreira, Jailton Ferreira do Nascimento, Deborah Cordeiro de Andrade, Camila S. Figueiredo |
---|---|
Jazyk: | angličtina |
Rok vydání: | 2018 |
Předmět: |
chemistry.chemical_classification
Aqueous solution Regeneration Process Strontium carbonate General Chemical Engineering Inorganic chemistry Clathrate hydrate Salt (chemistry) lcsh:TP155-156 02 engineering and technology 021001 nanoscience & nanotechnology Salt Solubility Solvent chemistry.chemical_compound Strontium Carbonate 020401 chemical engineering chemistry Carbon dioxide Isobar 0204 chemical engineering Solubility lcsh:Chemical engineering 0210 nano-technology Monoethyleneglycol |
Zdroj: | Repositório Institucional da UFRN Universidade Federal do Rio Grande do Norte (UFRN) instacron:UFRN Brazilian Journal of Chemical Engineering, Vol 35, Iss 2, Pp 395-402 Brazilian Journal of Chemical Engineering v.35 n.2 2018 Brazilian Journal of Chemical Engineering Associação Brasileira de Engenharia Química (ABEQ) instacron:ABEQ |
Popis: | In order to inhibit natural gas hydrate formation, monoethyleneglycol (MEG) is usually injected into producing well heads. The MEG regeneration process is continuously performed at the platform. Scaling problems usually occur due to the presence of chlorides and carbonates. This work presents salt solubility data for the aqueous system with strontium carbonate, MEG and carbon dioxide. A specific analytical method was developed. Thus, experimental data for strontium carbonate (SrCO3) solubility at various carbon dioxide pressures are reported. Solubilities of SrCO3 in water were measured from 760 to 1610 mmHg at 278.15. 288.15. 298.15 and 323.15 K. For the mixed solvent (ms) conditions, solubilities were measured at 298.15 K and four isobars, i.e., 760, 1210, 1410 and 1520 mmHg. Experimental data were correlated and demonstrated to be accurate for thermodynamic modeling and process simulation. |
Databáze: | OpenAIRE |
Externí odkaz: |