A Model-Reference Sliding Mode for Dual-Stage Actuator Servo Control in HDD

Autor: W. Chatlatanagulchai, Siwaphon Sonkham, Unnat Pinsopon
Jazyk: angličtina
Rok vydání: 2014
Předmět:
DOI: 10.5281/zenodo.2659874
Popis: This paper presents a method of sliding mode control (SMC) designing and developing for the servo system in a dual-stage actuator (DSA) hard disk drive. Mathematical modeling of hard disk drive actuators is obtained, extracted from measuring frequency response of the voice-coil motor (VCM) and PZT micro-actuator separately. Matlab software tools are used for mathematical model estimation and also for controller design and simulation. A model-reference approach for tracking requirement is selected as a proposed technique. The simulation results show that performance of a model-reference SMC controller design in DSA servo control can be satisfied in the tracking error, as well as keeping the positioning of the head within the boundary of +/-5% of track width under the presence of internal and external disturbance. The overall results of model-reference SMC design in DSA are met per requirement specifications and significant reduction in %off track is found when compared to the single-state actuator (SSA).
{"references":["Takashi Yamaguchi, \"HDD Servo Control Development -Present and Future,\" SICE-ICASE International Joint Conference, October 2006","K.C. Tan, et al., \"Evolutionary design and implementation of a hard disk drive servo control system,\" Springer-Verlag, Published March 2006","A. Al Mamun, T. H. Lee, and T. S. Low, \"Frequency domain identification of transfer function model of a disk drive actuator,\" Mechatronics, vol. 12, pp. 563-574, May 2002.","T. Suthasun, et al., \"System identification and controller design for dual actuated hard disk drive,\" Control Engineering Practice 12 (2004)","Bharat Bhushan (Ed.), Springer Handbook of Nanotechnology 2nd Edition. Springer 2005","Chen BM, Lee TH, Venkataramanan V., Hard Disk Drives Servo Systems. Springer: New York, London, 2002","Abdullah Al M., GuoXiao G, Chao Bi, Hard Disk Drive Mechatronics and Control. Taylor & Francis, 2007","H. Numasato and M. Tomizuka, \"Settling control and performance of a dual-actuator system for hard disk drives,\" IEEE-ASME Transactions on Mechatronics, vol. 8, pp. 431-438, Dec 2003.","Kemao Peng, et al., \"Design and implementation of a dual-stage actuated HDD servo system via composite nonlinear control,\" Mechatronics 14 (2004) 965–988\n[10]\tZheng, Q. and M. Tomizuka., \"Compensation of Dominant Frequency Components of Nonrepeatable Disturbance in Hard Disk Drives,\" IEEE Transactions on Magnetics. Vol. 43. No. 9. pp. 3756-3762. 2007\n[11]\tYou, K.H. and M. Hong, \"Robust Linear Quadratic Sliding-Mode Control for Hard Disk Drives,\" IEEE Transactions on Instrumentation and Measurement. Vol. 56. No. 3. pp. 1087-1093. 2007\n[12]\tLow, K.S. and T.S. Wong., \"A Multiobjective Genetic Algorithm for Optimizing the Performance of Hard Disk Drive Motion Control System,\" IEEE Transactions on Industrial Electronics. Vol. 54. 2007\n[13]\tTaghirad, H.D. and E. Jamei., \"Robust Performance Verification of Adaptive Robust Controller for Hard Disk Drives,\" IEEE Transactions on Industrial Electronics. Vol. 55. No. 1. pp. 448-456. 2008.\n[14]\tDu, C., et al., \"Disturbance Rejection for a Data Storage System via Sensitivity Loop Shaping and Adaptive Nonlinear Compensation,\" IEEE/ASME Transactions on Mechatronics. Vol. 13. No. 5. 2008\n[15]\tRoberto Horowitz, et al., \"Dual-stage servo systems and vibration compensation in computer hard disk drive,\" Control Engineering Practice 15 (2007) 291–305\n[16]\tHongbo Zhang, et al., \"Dual-stage HDD head positioning using an Hinf controller and a tracking differentiator,\" Mechatronics 19 (2009)\n[17]\tSeung-Hi Lee, et al., \"Design of A Dual-stage Actuator Control System with Discrete-Time Sliding Mode for Hard Disk Drives,\" IEEE Conference on Decision and Control, Australia, December 2000\n[18]\tW.C. Wu, and T.S. Liu, \"Sliding mode based learning control for track-following in HDD,\" Mechatronics 14 (2004) \n[19]\tTsang-Li Tai, Jian-Shiang Chen, \"Discrete-time sliding-mode controller for dual-stage systems -A hierarchical approach,\" Mechatronics 15 (2005) 949–967\n[20]\tG. Herrmann, et al., \"Application of a discrete sliding mode technique to a HDD dual-stage track-seek and track-following servo system,\" 22nd IEEE International Symposium on Intelligent Control (2007) \n[21]\tQinglei Hu, et al., \"Discrete-Time Sliding Mode Control With Time-Varying Surface for Hard Disk Drives,\" IEEE Trans Control System Technology, Vol. 17, No. 1, January 2009\n[22]\tEdwards C, Spurgeon SK, Sliding Mode Control: Theory and Applications. Taylor & Francis: U.K., 1998.\n[23]\tUtkin, V. I., Sliding Modes in Control Optimization, Springer-Verlag, Berlin, 1992.\n[24]\tKhalil, H. K., Nonlinear Systems, Prentice Hall, 2001."]}
Databáze: OpenAIRE