Long-term creep rupture strength prediction for a new grade of 9Cr martensitic creep resistant steel (G115)—An application of a new tensile creep rupture model
| Autor: | Z.D. Xiang, X.L. Song, C. C. Jiang, J. Jia, Z. Dong |
|---|---|
| Rok vydání: | 2020 |
| Předmět: |
lcsh:TN1-997
Materials science Model parameters 02 engineering and technology Martensitic creep resistant steel 01 natural sciences Long-term creep strength Biomaterials Stress (mechanics) Stress range Flexural strength 0103 physical sciences Ultimate tensile strength Composite material lcsh:Mining engineering. Metallurgy 010302 applied physics Creep rupture model Metals and Alloys Creep Microstructure evolution 021001 nanoscience & nanotechnology Surfaces Coatings and Films Martensite Ceramics and Composites 0210 nano-technology |
| Zdroj: | Journal of Materials Research and Technology, Vol 9, Iss 3, Pp 5542-5548 (2020) |
| ISSN: | 2238-7854 |
| DOI: | 10.1016/j.jmrt.2020.03.079 |
| Popis: | A method is presented to firstly rationalise the short-term creep rupture strength data and then to predict the 100,000 h creep rupture strengths of a new 9Cr grade of martensitic creep resistant steels (G115) at different temperatures. The method is made possible by a new tensile creep rupture model, which is formulated by combining a new tensile creep model that integrates tensile strength at creep temperature with the Monkman–Grant relationship. On the basis of this new tensile creep rupture model, the activation energy of creep rupture determined for the steel G115, which is 293 ± 25 kJ/mol, does not depend on stress or stress range, and the creep rupture stress exponent depends only on stress range but not on temperature. The model parameters determined from short-term creep rupture strength data can then be used to predict the long-term creep rupture strengths at different temperatures for this new steel grade. The reliability of the predictions is analysed and the microstructural evolutions occurring during creep that may cause premature creep rupture and hence lead to possible over-predictions are also delineated. Based on the prediction results obtained, the highest applicable temperature of this new steel grade for power plant applications is determined to be slightly higher than 625 °C. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|