Effect of Ce Addition and Heat Treatment on Microstructure Evolution and Tensile Properties of Industrial A357 Cast Alloy
Autor: | Qian Liu, Zheng Yang, Kuan Tan, Changming Qiu, Yanfeng Wang |
---|---|
Jazyk: | angličtina |
Rok vydání: | 2020 |
Předmět: |
lcsh:TN1-997
Materials science Alloy microstructure Intermetallic Nucleation 02 engineering and technology engineering.material 01 natural sciences Dendrite (crystal) 0103 physical sciences Ultimate tensile strength General Materials Science rare earth Ce Composite material lcsh:Mining engineering. Metallurgy Eutectic system 010302 applied physics tensile properties Acicular heat treatment Metals and Alloys Industrial A357 cast alloy 021001 nanoscience & nanotechnology Microstructure engineering 0210 nano-technology intermetallic compound |
Zdroj: | Metals, Vol 10, Iss 1100, p 1100 (2020) Metals Volume 10 Issue 8 |
ISSN: | 2075-4701 |
Popis: | The effects of adding different Ce contents (0&ndash 0.32 wt.%) on the microstructure, mechanical properties, and fracture morphology of industrial A357 cast alloy in as-cast and T6 heat treatment were studied. The main purpose of this study is to improve the microstructure stability and tensile properties of industrial A357 cast alloy. The microstructural analyses indicate that the addition of Ce causes refinement of the &alpha Al primary phase for the reason that the formation of intermetallic compounds containing (AlSiCeMg) elements enriches the front of the solid&ndash liquid interface, which causes an increase in constitutional undercooling. Simultaneously, the addition of Ce also affected the characteristics of eutectic Si particles, which make its morphology change from acicular structures into fragmented and spheroidized. This is mainly due to the formation of Ce-rich precipitates during solidification, which increase the constitutional undercooling and suppress the nucleation of the eutectic Si particles, resulting in the change of eutectic Si characteristics. Moreover, the needle-like morphology of a Fe-containing intermetallic is transformed into &alpha (AlSiFeCe) phase containing rare earth Ce when part of the Ce atoms entered &beta (Al5FeSi) phase compounds. The tensile properties of the modified alloys were improved in the as-cast and T6 heat treatment as a consequence of simultaneous refinement of both secondary dendrite arm spacing and grains and the improvement of eutectic Si particles and Fe-containing intermetallic morphology. The fracture surface of the modified alloy has more dimples than the unmodified alloy, which indicates that the main fracture pattern of the modified alloy is dimple fracture caused by the crack of eutectic Si particles. The optimal percentage of Ce in industrial A357 cast alloy was determined to be 0.16 wt.% according to the change of microstructures structure and mechanical properties. These experimental results provide a new basis for adding rare earth Ce to improve the performance of parts in the actual production of industrial A357 cast alloy. |
Databáze: | OpenAIRE |
Externí odkaz: |