PRODUCTION OF AA5754/B4C COMPOSITE MATERIALS BY THE SEMI-SOLID STIRRING METHOD
| Autor: | Nilhan Urkmez Taskin, Rifat Yakut |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2019 |
| Předmět: |
B4C
Aluminum Metal Matrix Composite Semi-Solid Stirring Materials science Alloy Metal matrix composite Aluminum B4C Metal Matrix Composite Semi-Solid Stirring Hardness Mühendislik chemistry.chemical_element Bending engineering.material Compression (physics) Microstructure Engineering chemistry Aluminium engineering Aluminum composites Composite material Semi solid |
| Zdroj: | Volume: 14, Issue: 2 57-67 Technological Applied Sciences |
| ISSN: | 1308-7223 |
| Popis: | Aluminumcomposites were produced by reinforcing an AA5754 aluminum alloy with B4Cparticles. The semi-solid stirring and low-pressure solidification methods wereused to produce AA5754/B4C composites, and the mechanical characteristics ofthe samples that were obtained were determined by three-point bending andcompression tests. Additionally, microstructure examinations were made by SEM,EDS and XRD, and the sucsesfull producibility of the B4C reinforced aluminiumcomposites with the method that was used was seen. Aluminum composites were produced by reinforcing an AA5754 aluminum alloy with B4C particles. The semi-solid stirring and low-pressure solidification methods were used to produce AA5754/B4C composites, and the mechanical characteristics of the samples that were obtained were determined by three-point bending and compression tests. Additionally, microstructure examinations were made by SEM, EDS and XRD, and the sucsesfull producibility of the B4C reinforced aluminium composites with the method that was used was seen. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|