Analysis of Hydrometallurgical Methods for Obtaining Vanadium Concentrates from the Waste by Chemical Production of Vanadium Pentoxide
| Autor: | Ulyana Kologrieva, Anton Volkov, Irina Krasnyanskaya, Pavel Stulov, Dmitry Wainstein |
|---|---|
| Rok vydání: | 2021 |
| Předmět: |
Technology
Microscopy QC120-168.85 QH201-278.5 vanadium pentoxide Engineering (General). Civil engineering (General) TK1-9971 leaching sludge Descriptive and experimental mechanics vanadium waste General Materials Science concentrate reduction vanadium alloys precipitation hydrolysis Electrical engineering. Electronics. Nuclear engineering TA1-2040 |
| Zdroj: | Materials, Vol 15, Iss 938, p 938 (2022) Materials; Volume 15; Issue 3; Pages: 938 |
| ISSN: | 1996-1944 |
| Popis: | The paper describes hydrometallurgical methods to recycle wastes of vanadium pentoxide chemical fabrication. Sludges containing a significant amount of V2O5 can be considered as an additional source of raw materials for vanadium production. We studied the one-stage leaching method using various iron-based reductants for converting V5+ to V4+ in a solution allowing to precipitate V when its concentration in the solution is low. As a result of the reduction leaching with further precipitation, we obtained concentrates with V2O5 content of 22–26% and a high amount of harmful impurities. Multistage counterflow leaching can be used to fabricate solutions with vanadium pentoxide concentration suitable for vanadium precipitation by hydrolysis and adding ammonium salts. The solutions with V2O5 content of ≈15 g/L can be obtained from the initial sludge by three-stage counterflow vanadium leaching. A concentrate with a content of 78 wt% V2O5 can be precipitated from these solutions at pH = 2.4 by adding ammonium chloride. Additionally, concentrate with V2O5 content of ≈94 wt% was precipitated from the solution with a concentration of >20 g/L V2O5 obtained from the roasted sludge. The concentrates were purified for increasing the vanadium content to 5–7%. The consumption and technological parameters of the considered processes are presented in the paper. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|