Effects of the sludge physical-chemical properties on its microwave drying performance
| Autor: | Eva Kocbek, Hector A. Garcia, Christine M. Hooijmans, Ivan Mijatović, Davor Kržišnik, Miha Humar, Damir Brdjanovic |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2022 |
| Předmět: |
Environmental Engineering
Sludge drying sludge drying les latent heat requirement sušenje blata Water sorption properties Environmental Chemistry les obsevanje z mikrovalovi sušenje blata energijska učinkovitost sorpcijske lastnosti energijska učinkovitost Desiccation udc:630*8 Microwaves microwave irradiation sludge drying energy efficiency water sorption properties latent heat requirement Waste Management and Disposal microwave irradiation energy efficiency Microwave irradiation Sewage Latent heat requirement Water Pollution Energy efficiency obsevanje z mikrovalovi sorpcijske lastnosti Oils water sorption properties |
| Zdroj: | Science of the total environment, vol. 828, 2022. Science of the total environment, 1 spletni vir (1 datoteka PDF ([15] str.)) : Ilustr., Vol. 828, 2022 COBISS-ID: 23110917 Science of the Total Environment, 828 |
| ISSN: | 1879-1026 0048-9697 |
| Popis: | Thermal drying is an effective sludge treatment method for dealing with large volumes of sludge. Microwave (MW) technology has been proposed as an effective and efficient technology for sludge drying. The physical-chemical properties of the sludge depend both on the origin of the sludge, as well as on the treatment process at which the sludge has been exposed. The physical-chemical properties of the sludge affect the performance and the subsequent valorisation and management of the sludge. This study evaluated the effect of certain physical-chemical properties of the sludge (moisture content, organic content, calorific value, porosity, hydrophobicity, and water-sludge molecular interaction, among others) on the MW sludge drying and energy performance. Four different types of sludge were evaluated collected from municipal wastewater treatment plants and septic tanks. The performance of the MW system was assessed by evaluating the sludge drying rates, exposure times, energy efficiencies and power input consumed by the MW system and linking the MW drying performance to the sludge physical-chemical properties. The results confirmed that MW drying substantially extends the constant drying period associated with unbound water evaporation, irrespective of the sludge sample evaluated. However, the duration and intensity were determined to depend on the dielectric properties of the sludge, particularly on the distribution of bound and free water. Sludge samples with a higher amount of free and loosely bound water absorbed and converted MW energy into heat more efficiently than sludge samples with a lower amount of free water. As a result, the sludge drying rates increased and the constant drying rate period prolonged; hence, leading to an increase in MW drying energy efficiency. The availability of free and loosely bound water molecules was favoured when hydrophobic compounds, e.g., oils and fats, were present in the sludge. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect