Effects of Electropolishing Surface Treatment on the Cyclic Fatigue Resistance of BioRace Nickel-Titanium Rotary Instruments

Autor: Gilberto J. Debelian, Raquel Villela Lemes Marques, Edson Jorge Lima Moreira, Julio Cezar M. Oliveira, José F. Siqueira, Victor Talarico Leal Vieira, Carlos N. Elias, Hélio Pereira Lopes
Rok vydání: 2010
Předmět:
Zdroj: Journal of Endodontics. 36:1653-1657
ISSN: 0099-2399
DOI: 10.1016/j.joen.2010.06.026
Popis: This study evaluated the influence of electropolishing surface treatment on the number of cycles to fracture of BioRace rotary nickel-titanium endodontic instruments.BioRace size BR5C instruments with or without electropolishing surface treatment were used in an artificial curved canal under rotational speed of 300 rpm until fracture. Fractured surfaces and the helical shafts of fractured instruments were analyzed by scanning electron microscopy (SEM).Polished instruments displayed a significantly higher number of cycles to fracture when compared with nonpolished instruments (P.001). Actually, the number of cycles to fracture of a polished BR5C instrument was 124% higher than that of a nonpolished instrument. SEM analysis showed that the fractured surface of both polished and nonpolished BR5C instruments had ductile morphologic characteristics. Evaluation of the separated fragments after cyclic fatigue testing showed the presence of microcracks near the fracture surface. Polished instruments exhibited fine cracks that assumed an irregular path (zigzag crack pattern), whereas nonpolished instruments showed cracks running along the machining grooves.Electropolishing surface treatment of BioRace endodontic instruments significantly increased the cyclic fatigue resistance.
Databáze: OpenAIRE