Three Dimensional Model of a High Temperature PEMFC. Study of the Flow Field Effect on Performance

Autor: Mohamed Mamlouk, C. M. Rangel, T. Sousa, Keith Scott
Rok vydání: 2012
Předmět:
Zdroj: Repositório Científico de Acesso Aberto de Portugal
Repositório Científico de Acesso Aberto de Portugal (RCAAP)
instacron:RCAAP
ISSN: 1615-6846
DOI: 10.1002/fuce.201100197
Popis: A three-dimensional isothermal model of a high temperature polymer membrane fuel cell equipped with polybenzimidazole membrane is described. All major transport phenomena were taken into account except the species crossover through the membrane. The cathode catalyst layer was treated as spherical catalyst agglomerates with porous inter-agglomerate spaces. The inter-agglomerate spaces were filled with a mixture of electrolyte (hot phosphoric acid) and polytetrafluoroethylene (PTFE). This approach proved to be an essential requirement for accurate simulation. In this particular paper, the influence of different flow field designs and dimensions on performance was intensely study. Traditional configurations were tested (straight, serpentine, pin-in, and interdigitated), and new designs were proposed. With these new designs, we tried to maximize performance by providing homogeneous reactants distribution over the active area keeping low-pressure drop and relatively high velocity. The dimension and position of the inlet and outlet manifolds were also analyzed. From the obtained results a massive influence of the manifolds position and dimension on performance was observed. This fact can provide important guidelines for future bipolar plates optimization.
Databáze: OpenAIRE
Externí odkaz: