Investigation of Ricochet Angles for 5 mm Various Metal Plates with AP 7.62 Bullets
| Autor: | Ümit YILMAZ, Oktay KAYA, Mutlu ÇAKIR |
|---|---|
| Rok vydání: | 2022 |
| Předmět: | |
| Zdroj: | Volume: 26, Issue: 1 185-194 Sakarya University Journal of Science |
| ISSN: | 2147-835X |
| Popis: | In this study, the effect of a high-speed AP 7.62 bullet on Ti6Al4V, AISI 4340, Inconel-718, AlSi10Mg and Al 6061 - T6 materials at different impact angles were investigated by using the finite element package software LS-DYNA 971. AISI 4340 was taken as the bullet material and 850 m/s as a speed for high-speed ballistic investigation. Angle of the obliquity of the bullet against the plates has been taken in the range of 0-80º. Simulations were carried out at 5 degrees increments. It has been investigated that at what angle the bullet touches the materials, the bullet will ricochet. Also, deformations on plates have been examined. The results showed a good correlation with the literature. The lowest ricochet angle has been obtained in Inconel-718 as 20 º followed by AISI 4340 as 25º, Ti6Al4V as 55º, Al 6061 - T6 as 75º and lastly AlSi10Mg as 80 º. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|