Bonding durability between acrylic resin adhesives and titanium with surface preparations
Autor: | Yoshito Minesaki, Koichi Muraguchi, Kousuke Matsumura, Naomi Tanoue, Hiroaki Yanagida, Hiroyuki Minami |
---|---|
Rok vydání: | 2016 |
Předmět: |
Materials science
Surface Properties Acrylic Resins Polishing chemistry.chemical_element 02 engineering and technology engineering.material 03 medical and health sciences chemistry.chemical_compound 0302 clinical medicine Adhesives Materials Testing Composite material General Dentistry Acrylic resin Primer (paint) Titanium Bond strength Dental Bonding 030206 dentistry 021001 nanoscience & nanotechnology Casting Silane Resin Cements chemistry visual_art Ceramics and Composites engineering visual_art.visual_art_medium Methacrylates Adhesive 0210 nano-technology Shear Strength |
Zdroj: | Dental materials journal. 36(1) |
ISSN: | 1881-1361 |
Popis: | The purpose of the present study was to evaluate the efficacy of pretreatment on the bonding durability between titanium casting and two acrylic adhesives. Cast titanium disk specimens treated with four polymer-metal bonding systems as follow: 1) air-abraded with 50-70 μm alumina, 2) 1)+Alloy Primer, 3) 1)+M.L. Primer and 4) tribochemical silica/silane coating system (Rocatec System). The specimens were bonded with M bond or Super-bond C&B adhesive. The shear bond strengths were determined before and after thermocycling (20,000 cycles). The surface characteristics after polishing, and for the 1) and 4) preparations were determined. The bond strengths for all combinations significantly decreased after thermocycling. The combination of Super-bond C&B adhesive and 2) led to significantly higher bond strength than the other preparations after thermocycling. The maximum height of the profile parameters for the polishing group was lower than other preparations. |
Databáze: | OpenAIRE |
Externí odkaz: |