Zinc corrosion after loss-of-coolant accidents in pressurized water reactors – Thermo- and fluid-dynamic effects
| Autor: | André Seeliger, Stefan Renger, Sören Alt, Ulrich Harm, Wolfgang Kästner, Holger Kryk |
|---|---|
| Rok vydání: | 2016 |
| Předmět: |
Cladding (metalworking)
Nuclear and High Energy Physics Materials science 020209 energy Mechanical engineering chemistry.chemical_element 02 engineering and technology Zinc Rod Corrosion symbols.namesake downstream effects 0202 electrical engineering electronic engineering information engineering General Materials Science Safety Risk Reliability and Quality Waste Management and Disposal Dissolution LOCA pressurized water reactor corrosion zinc borate Mechanical Engineering PWR zinc Zirconium alloy Metallurgy loss-of-coolant accident Galvanization Coolant Nuclear Energy and Engineering chemistry symbols reactor safety research boric acid |
| Zdroj: | Nuclear Engineering and Design 305(2016), 489-502 |
| ISSN: | 0029-5493 |
| DOI: | 10.1016/j.nucengdes.2016.06.006 |
| Popis: | Within the framework of the German reactor safety research, generic experimental investigations were carried out aiming at thermal-hydraulic consequences of physicochemical mechanisms, caused by dissolution of zinc in boric acid during corrosion processes at hot-dip galvanized surfaces of containment internals at lower coolant temperatures and the subsequent precipitation of solid zinc borates in PWR core regions of higher temperature. This constellation can occur during sump recirculation operation of ECCS after LOCA. Hot-dip galvanized compounds, which are installed inside a PWR containment, may act as zinc sources. Getting in contact with boric acid coolant, zinc at their surfaces is released into coolant in form of ions due to corrosion processes. As a long-term behavior resp. over a time period of several days, metal layers of zinc and zinc alloys can dissolve extensively. First fundamental studies at laboratory scale were done at the Helmholtz-Zentrum Dresden-Rossendorf (HZDR). Their experimental results were picked up for the definition of boundary conditions for experiments at semi-technical scale at the Hochschule Zittau/Gorlitz (HSZG). Electrical heating rods with zircaloy cladding tubes have been used as fuel rod simulators. As near-plant core components, a 3 × 3 configuration of heating rods (HRC) and a shortened, partially heatable PWR fuel assembly dummy were applied into cooling circuits. The HRC module includes segments of spacers for a suitable representation of a heating channel geometry. Formations of different solid zinc compounds (mainly borates) were observed at the heatable zircaloy surfaces and characterized in detail during the heating-up to several coolant temperatures. As a strict consequence of their proven influence on heat removal and coolant flow behavior in the PWR core, preventive water-chemical methods were defined and tested. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect