Effects of substrate rotation during AlSi-HiPIMS/Ti-DCMS co-sputtering growth of TiAlSiN coatings on phase content, microstructure, and mechanical properties
| Autor: | Tun-Wei Hsu, Grzegorz Greczynski, Bjarke Holl Christensen, Klaus Pagh Almtoft, Robert Boyd, Szilárd Kolozsvári, Peter Polcik, Stephan Bolz, Werner Kölker, Christoph Schiffers, Biljana Mesic, Magnus Odén |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2023 |
| Předmět: |
Nanoteknik
Thin films HiPIMS Surfaces and Interfaces General Chemistry Materials Engineering Al+ and Si+ irradiation Condensed Matter Physics Surfaces Coatings and Films Materialteknik Materials Chemistry Nano Technology Substrate rotation Den kondenserade materiens fysik Magnetron sputtering TiAlSiN |
| Popis: | A combined high-power impulse and dc magnetron co-sputtering (HiPIMS/DCMS) technique is used to deposit Ti0.6Al0.32Si0.08N films with 1-fold substrate table rotation. Layers are grown at two different substrate-target separations, two different rotational speeds, and with different values of substrate bias. The aim is to study the role of (1) overlap between ion and neutral fluxes generated from HiPIMS and DCMS sources, respectively, and (2) the subplantation range of low-mass ions. Results from X-ray diffractometry highlight the necessity of flux intermixing in the formation of the metastable B1-structured TiAlSiN solid solutions. All films grown at short target-to-substrate distance contain the hexagonal AlN phase, as there is essentially no overlap between HiPIMS and DCMS fluxes, thus the Al+ and Si+ subplantation is very limited. Under conditions of high flux intermixing corresponding to larger target-to-substrate distance, no w-AlN forms irrespective of rotational speed (1 or 3 rpm) and bias amplitude (120 or 480 V), indicating that the role of Al+/Si+ and Ti flux overlap is crucial for the phase formation during film growth by HiPIMS/DCMS with substrate rotation. This conclusion is further supported by the fact that the reduction of the bilayer thickness with increasing the target-to-substrate distance (hence increasing flux overlap) is larger for films grown with higher amplitude of the substrate bias, indicative of more efficient Al+/Si+ subplantation into the c-TiN phase. Single-phase films with the hardness close to that of layers grown with stationary substrate table can be achieved, however, at the expense of higher compressive stress. Funding: VINNOVA (FunMat-II project) [2016-05156]; Swedish Research Council [2017-03813, 2017-06701]; Swedish government strategic research area grant AFM - SFO MatLiU [2009-00971] |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|