Experimental Study of Charge Neutralization at the Surface of Granular Layers of Insulating Materials
| Autor: | Mohamed Nemamcha, Lazhar Herous, Lucian Dascalescu, Miloud Kachi |
|---|---|
| Rok vydání: | 2013 |
| Předmět: |
Materials science
business.industry Electrical engineering Analytical chemistry Granular layer Granular material Electric charge Industrial and Manufacturing Engineering Control and Systems Engineering Electrode Corona ring Electric potential Electrical and Electronic Engineering Thin film Composite material business Corona discharge Voltage |
| Zdroj: | IAS Annual Meeting |
| ISSN: | 1939-9367 0093-9994 |
| DOI: | 10.1109/tia.2013.2243393 |
| Popis: | Neutralization of the residual electric charge is often a prerequisite for the optimal processing of insulating granules, thin films, or textile media. The aim of the present paper is to evaluate the factors that might affect the ability of AC corona discharge to eliminate the charge at the surface of polyethylene granular materials. The effectiveness of the neutralization is evaluated from the measurement of surface potential distribution before and after exposing the samples to a flux of bipolar ions. The corona discharge was generated by energizing at various high-voltage levels (16 kV, 20 kV, and 25 kV), and frequencies (1 Hz, 20 Hz, 50 Hz, 100 Hz, 200 Hz, 400 Hz) a wire-type corona electrode suspended at 30 mm above the granular layer disposed at the surface of a grounded plate. The results show that the neutralization efficiency can be improved by increasing the frequency of the high-voltage. An optimal value voltage can be experimentally determined for the case of practical interest when the frequency of the power supply is 50 Hz. In the same case, successive exposures to the AC corona discharge may enhance the efficiency of the neutralization. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|