A novel high-temperature MAS probe with optimized temperature gradient across sample rotor for in-situ monitoring of high-temperature high-pressure chemical reactions
Autor: | Hardeep S. Mehta, Mathew Campos, Nancy M. Washton, David W. Hoyt, Jesse A. Sears, Ying Chen, David J. Heldebrant, Eric D. Walter, Karl T. Mueller, Jotheeswari Kothandaraman |
---|---|
Rok vydání: | 2019 |
Předmět: |
Nuclear and High Energy Physics
Radiation Materials science 010405 organic chemistry Vespel Analytical chemistry General Chemistry 010402 general chemistry Polarization (waves) 01 natural sciences Chemical reaction Water-gas shift reaction 0104 chemical sciences Volumetric flow rate Temperature gradient Laser linewidth Magic angle spinning Instrumentation |
Zdroj: | Solid State Nuclear Magnetic Resonance. 102:31-35 |
ISSN: | 0926-2040 |
DOI: | 10.1016/j.ssnmr.2019.06.003 |
Popis: | We present a novel nuclear magnetic resonance (NMR) probe design focused on optimizing the temperature gradient across the sample for high temperature magic angle spinning (MAS) experiments using standard rotors. Computational flow dynamics (CFD) simulations were used to assess and optimize the temperature gradient across the sample under MAS conditions. The chemical shift and linewidth of 207Pb direct polarization in lead nitrate were used to calibrate the sample temperature and temperature gradient, respectively. A temperature gradient of less than 3 °C across the sample was obtained by heating bearing gas flows and adjusting its temperature and flow rate during variable temperature (VT) experiments. A maximum temperature of 350 °C was achieved in this probe using a Varian 5 mm MAS rotor with standard Vespel drive tips and end caps. Time-resolved 13C and 1H MAS NMR experiments were performed at 325 °C and 60 bar to monitor an in-situ mixed phase reverse water gas shift reaction, industrial synthesis of CH3OH from a mixture of CO2 and H2 with a Cu/ZnO/Al2O3 catalyst, demonstrating the first in-situ NMR monitoring of a chemical system at temperatures higher than 250 °C in a pressurized environment. The combination of this high-temperature probe and high-pressure rotors will allow for in-situ NMR studies of a great variety of chemical reactions that are inaccessible to conventional NMR setup. |
Databáze: | OpenAIRE |
Externí odkaz: |