Machining error model for full machining process of thread milling

Autor: Yuanhao Fan, Junxue Ren, Zihua Hu, Yiran Tang
Rok vydání: 2022
Předmět:
Zdroj: The International Journal of Advanced Manufacturing Technology. 123:511-526
ISSN: 1433-3015
0268-3768
DOI: 10.1007/s00170-022-10200-8
Popis: Thread milling is increasingly used in engineering manufacturing because of its advantages, but there must be error in the thread due to the machining principle. In response to this problem, this paper discussed the causes of thread milling error and established machining error model for the full machining process of thread milling. Firstly, geometric model of thread milling is developed based on the parametric definition of the cutter tooth surface, thread surface and tool-path. Then, based on the cutter motion characteristics of the thread milling penetration-retraction segments and machining segment, the machining error model is established. The calculation of machining error is transformed into solving for the relationship between the position of the intersection of the cutter profile line and the thread profile line generated in the cross section, which means that the three-dimensional problem is transformed into the two-dimensional problem. Finally, the proposed model is proven via thread milling experiments. The simulation results of machining error agree well with the experimental results, which proves the correctness and validity of the model. The model provides theoretical support for further research into thread milling machining error.
Databáze: OpenAIRE
Externí odkaz:
Nepřihlášeným uživatelům se plný text nezobrazuje