Copper Aluminum Nano Junction Normal Temperature Processes and Methods Applied to the LED High Heat Transfer Performance
| Autor: | Ming-Wen Wang, Bo-An Gao, Ding-Jun Lin, Jun-Han Chen |
|---|---|
| Rok vydání: | 2014 |
| Předmět: |
Fluid Flow and Transfer Processes
Computer Networks and Communications Light-emitting diodes 020209 energy 020208 electrical & electronic engineering General Engineering lcsh:A 02 engineering and technology Computational Mathematics Chemistry (miscellaneous) Modeling and Simulation Heat transfer performance Direct bonding of copper and aluminum 0202 electrical engineering electronic engineering information engineering lcsh:General Works Energy (miscellaneous) |
| Zdroj: | Smart Science, Vol 2, Iss 1, Pp 36-43 (2014) |
| ISSN: | 2308-0477 |
| DOI: | 10.1080/23080477.2014.11665602 |
| Popis: | High-power light-emitting diodes (LED) have extremely broad applications. However, with the job requirements of high-brightness and high color temperature from light-emitting diodes, it must be followed to enlarge the operating current, thus heating up more rapidly. If its heat dissipation problem cannot be effectively solved, operation will be prone to bring about color shift, and it may even considerably shorten its life. Moreover, application value will therefore be greatly reduced. So in order to enhance the high-power LED luminous brightness and life to cope with the future development needs of high-power LED components, it is necessary to replace the use of conductive silver paste to stick thermally conductive Cu slug fixing grain and lead frame heat dissipation aluminum sheet. This is done by directly bonding thermally conductive Cu slug with pure aluminum, the formation of highly efficient direct heat conduction cooling structure. Therefore the topic points at the crux of the LED heat dissipation difficulty, puts forward of copper and aluminum bonding technology in the ordinary temperature and pressure, method to effectively improve thermal conductivity performance between LED die bond Cu slug and joining aluminum cooling module. This will ultimately make the LED's operation and applications perfect. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|